Vinyl and similar products applied without a heat press > Cold Vinyl
entry level vinyl cutter info needed
royster13:
I run a GCC Expert 24 and a Cut-3000 (re-branded GCC Bengal).....
For 450.00 my Expert 24 has served me well for over 2 years and made me a pile of money.....I do not use it as much as the Cut-3000 because the Expert 24 is too noisy......
Do you need contour cutting?......If not and you have 1,000.00 spend my pick would be an Expert Pro....If you have less than 500.00 the Expert 24 will make you money until you can upgrade....If you have 2,200.00 take look at the Vinyl Express Q24 from Sign Warehouse......It is a re-branded FC Series Graphtec....
Inkworks:
After working at a few shops that ran cheap noisy cutters, when it came time for me to make my purchase I went straight to the graphtec so I could be in the same room and/or on the phone while it ran, but yeah, it was also 3-4 times more expensive....
Navigation
[0] Message Index
[*] Previous page
Go to full version