Tajima help

[jmd]

Just purchased a used TEHX C1501 for sampling, as I was tuning and timing it up I noticed the needle touches the fabric before the presser foot does. I can't get any more downward adjustment on the foot, its off a good 1/8" or more. Any thoughts.
Thanks

[jasonl]

Just purchased a used TEHX C1501 for sampling, as I was tuning and timing it up I noticed the needle touches the fabric before the presser foot does. I can't get any more downward adjustment on the foot, its off a good 1/8" or more. Any thoughts.
Thanks

there are videos and instructions online, google it.  thats how I learned.  I have to look at the instructions whenever I do it.

[jmd]

Thanks, I have been down that road with little helpful information. I am experienced with setting the timing and the needle bar ht stops, but have never come across this problem before. I am starting to think its an adustment in the lower recipricator, but I don't think that is possible.

[evilcaps]

Check This link.

Scroll down to videos, you will find the answer you r looking for.




http://www.hirschinternational.com/Support/Manuals-Videos/Tajima-Embroidery.aspx

[mooseman]

join the tajima users group on yahoo groups...lots of good info and the techs look in now & then.

couple of links

http://groups.yahoo.com/group/TajimaUsers/
http://groups.yahoo.com/group/TajimaPlus/

mooseman

[jmd]

Thanks all, I figured it out, there is a window on the left side where the motors are located. adjusted cam on PF arm. Didn't have to take anything apart except a cover.

[inkman996]

I watched the video for replacing the reciprocator holy cow i thought replacing one on a barudan was a lot of work!