Author Topic: discharge 4CP on black?  (Read 5949 times)

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
discharge 4CP on black?
« on: July 27, 2012, 09:44:41 AM »
has anybody tried it? It would obviously require a white, so it would end up being five colors, but it sounds intriguing . . .

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!


Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: discharge 4CP on black?
« Reply #1 on: July 27, 2012, 02:52:59 PM »
not that exactly, but we've done discharge white base with plastisol cmyk on top, flash the white. I think it depends on the base color under the dye, is it natural or white? Years ago, we used to make a white printer that went down first by sandwiching the cmyk films together, cutting a mask around the image, and contacting that so we would get a film that represented the spaces between the cmyk dots; it went down first, no flash. I would think you might need at least that to start, then see what you get under the cmyk discharge.

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline jasonl

  • !!!
  • Hero Member
  • *****
  • Posts: 582
Re: discharge 4CP on black?
« Reply #2 on: July 27, 2012, 03:02:51 PM »
got screens burned and will be printing probably monday.  CCI discharge base, Union triple strength CMYK.  Here is what I am attempting.

"We Make Blank Shirts Look Awesome!"

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: discharge 4CP on black?
« Reply #3 on: July 27, 2012, 03:13:05 PM »
Thats going to be badd ass. I cant wait for this one.
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin

Offline sportsshoppe

  • !!!
  • Hero Member
  • *****
  • Posts: 649
  • A way of life.
Re: discharge 4CP on black?
« Reply #4 on: July 27, 2012, 04:04:48 PM »
Impressive!!!! can't wait to see.

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: discharge 4CP on black?
« Reply #5 on: July 27, 2012, 04:53:06 PM »
I've done about 4 jobs using 4 clr process on black tees. Discharge white top highlight color.  The results were good and no hand. it was exciting to see process on black with no hand but still, at the same time I couldn't help but think how much brighter it might be on white tees. So, the customer then just happened to request that same job on a white tee also. So, here's the trick. You make the white print look like the print does on the black tee. Thats the goal. So they look consistent.
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline jasonl

  • !!!
  • Hero Member
  • *****
  • Posts: 582
Re: discharge 4CP on black?
« Reply #6 on: July 27, 2012, 06:09:44 PM »
fingers crossed! wish me luck!
"We Make Blank Shirts Look Awesome!"

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: discharge 4CP on black?
« Reply #7 on: July 27, 2012, 06:25:37 PM »
fingers crossed! wish me luck!

that looks like it will be a lot of fun. 'will definitely keep the fingers crossed for you!

Make sure you post the results.

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline jasonl

  • !!!
  • Hero Member
  • *****
  • Posts: 582
Re: discharge 4CP on black?
« Reply #8 on: July 27, 2012, 07:01:48 PM »
fingers crossed! wish me luck!

that looks like it will be a lot of fun. 'will definitely keep the fingers crossed for you!

Make sure you post the results.

pierre

No doubt!
"We Make Blank Shirts Look Awesome!"

Offline jasonl

  • !!!
  • Hero Member
  • *****
  • Posts: 582
Re: discharge 4CP on black?
« Reply #9 on: July 30, 2012, 03:52:28 PM »
here it is on white, White, yellow, highlight white, magenta, cyan, black.  I will be dropping in the discharge tomorrow morning and posting a new pic.

"We Make Blank Shirts Look Awesome!"

Offline jasonl

  • !!!
  • Hero Member
  • *****
  • Posts: 582
Re: discharge 4CP on black?
« Reply #10 on: July 30, 2012, 03:58:32 PM »
another pic on black--white, yellow, highlightwhite, magenta, cyan, black.   Pics sux, it does look pretty good.  Tomorrow I will have the discharge pic!  Fingers still crossed.

"We Make Blank Shirts Look Awesome!"

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: discharge 4CP on black?
« Reply #11 on: July 30, 2012, 09:19:12 PM »
who did the seps for you?
Specializing in shop assessment's, flow and efficiency

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: discharge 4CP on black?
« Reply #12 on: July 30, 2012, 10:16:52 PM »
who did the seps for you?

He's got an employee that is a member here as well. If I remember his screen name Is Raven.
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline jasonl

  • !!!
  • Hero Member
  • *****
  • Posts: 582
Re: discharge 4CP on black?
« Reply #13 on: July 30, 2012, 11:02:48 PM »
yep, ravenmark.  he is a badmofo!
"We Make Blank Shirts Look Awesome!"

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: discharge 4CP on black?
« Reply #14 on: July 31, 2012, 07:50:03 AM »
i would say he is. great job.
Specializing in shop assessment's, flow and efficiency