Author Topic: Non Woven Polypropolyn Bags  (Read 1160 times)

Offline Logoman

  • Sr. Member
  • ****
  • Posts: 394
  • Life is what happens while your making other plans
Non Woven Polypropolyn Bags
« on: August 02, 2012, 02:22:14 PM »
Anybody print on these? I was told you would run them through the dryer at 275 anyone know?
Pete


Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3539
Re: Non Woven Polypropolyn Bags
« Reply #1 on: August 02, 2012, 02:31:47 PM »
i found running them at 240 was better. otherwise you run the risk of them not only burning but shriveling up!

they are a pain for sure! good luck!
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285

Offline Inkworks

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1761
  • Pad&Screenprinter
Re: Non Woven Polypropolyn Bags
« Reply #2 on: August 02, 2012, 02:45:05 PM »
Low temp plastisol or regular plastisol with nylon additive gets the job done. Max out the temp in your oven without shriveling the bags and you should be good to go.
Wishin' I was Fishin'

Offline balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 984
Re: Non Woven Polypropolyn Bags
« Reply #3 on: August 02, 2012, 03:08:08 PM »
I just did 500 with a 2 color one side/1 color other side. We have the dryer running at 400 but very fast. I figured as long as the ink has a good gel there will be no problem. It is not like some will try to wash one.
Matt
When you dig grave will you make it shallow so that I can feel the rain?

Offline printguy

  • !!!
  • Verified/Junior
  • **
  • Posts: 85
Re: Non Woven Polypropolyn Bags
« Reply #4 on: August 02, 2012, 03:16:25 PM »
What color were the bags? If they were dark & required flashing wouldn't that screw the bags up?

Offline balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 984
Re: Non Woven Polypropolyn Bags
« Reply #5 on: August 02, 2012, 06:01:00 PM »
True. they were all light colors like white, yellow and pink.
I think that you would not have to flash these though. The material is so thin that the ink will sit on top no matter what. It can't penetrate in the material.
When you dig grave will you make it shallow so that I can feel the rain?