Author Topic: Discharging G8000 Dry Blends to White  (Read 1182 times)

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Discharging G8000 Dry Blends to White
« on: July 13, 2012, 03:16:50 PM »
Anyone tried it?  I ran some of the light blue discharge we had on press on some black aqua AA 50/50s and it actually worked.  These G8000s are lime green.  We'd have to post-launder of course but it may be a much better race shirt than a plastisol print, no matter how soft the hand as it could breathe.   


Offline brandon

  • Gonzo Member
  • ******
  • Posts: 1709
Re: Discharging G8000 Dry Blends to White
« Reply #1 on: July 13, 2012, 04:12:59 PM »
Anyone tried it?  I ran some of the light blue discharge we had on press on some black aqua AA 50/50s and it actually worked.  These G8000s are lime green.  We'd have to post-launder of course but it may be a much better race shirt than a plastisol print, no matter how soft the hand as it could breathe.

Just be careful. Last week we did kelly green 50/50's with discharge underneath and white water base on top. Worked well. Must have dead on reg though