« previous next »
Pages: [1]   Go Down

Author Topic: CTS  (Read 1972 times)

Offline easyscore

  • Full Member
  • ***
  • Posts: 105
CTS
« on: September 18, 2013, 12:58:36 PM »
If you could get into a used working CTS unit that was serviced yearly for under $10,000 would you do it.

Some basic info:
ink based system
handles 23 by 31 frames
tri-loc compatible
print area - approx. 14" by 20"
4 minutes to print 12" by 14" image

Any thoughts?
Logged

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: CTS
« Reply #1 on: September 18, 2013, 01:47:22 PM »
YES, YES and YES as long as it wasn't one of those early ones from a company that is no longer in business.
Logged
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.

Offline screenprintguy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1677
  • Constantly thanking the Lord!
Re: CTS
« Reply #2 on: September 18, 2013, 04:09:58 PM »
what kind is it? acticam, diablo, lawson, older m&r? those at least still get service
Logged
Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803 www.evolutionaryscreenprinting.com

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: CTS
« Reply #3 on: September 18, 2013, 05:13:55 PM »
I wouldn't say too much either if I were him, one of us might just snake it out from under him :)
Logged
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.

Offline easyscore

  • Full Member
  • ***
  • Posts: 105
Re: CTS
« Reply #4 on: September 18, 2013, 05:46:55 PM »
Planet B Sprite II. Probably at 6 years old but running.

You guys have been open and helpful so I don't see a reason not to put it out there.

Alex
Logged

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: CTS
« Reply #5 on: September 18, 2013, 06:54:33 PM »
I don't know that there is much support, parts, brain to pick etc for that machine.  The guys that were behind it are still around but to my knowledge they have dissolved and it was I think partially backed by "a person who shall not be named" so I'd be very diligent in your research on that unit.
Logged
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: CTS
« Reply #6 on: September 18, 2013, 07:39:52 PM »
Quote from: alan802 on September 18, 2013, 06:54:33 PM
I don't know that there is much support, parts, brain to pick etc for that machine.  The guys that were behind it are still around but to my knowledge they have dissolved and it was I think partially backed by "a person who shall not be named" so I'd be very diligent in your research on that unit.
Yes it was backed and run by Voldemort B*****. :o :o  However not a bad unit.  A company called The Graphic Cow runs them.  In SC.
Logged
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline screenprintguy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1677
  • Constantly thanking the Lord!
Re: CTS
« Reply #7 on: September 18, 2013, 11:18:47 PM »
I know a guy here in Lakeland that I'm pretty sure knows those in and ouy. He handles cts service and installs for Roeder industries, and the machines they sell/sold from acticam. His name is Ralph Eisenhower, you can contact him through Roeder Industies, their office is in Orlando.  If anything,  Ralph or Shawn Roeder can point you in the right direction,  but I'm pretty sure they service those units.
Logged
Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803 www.evolutionaryscreenprinting.com

Offline easyscore

  • Full Member
  • ***
  • Posts: 105
Re: CTS
« Reply #8 on: September 18, 2013, 11:26:36 PM »
Thanks! I just went to their site and they had it as one of the brands they service.

Cheers
Logged

Offline screenprintguy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1677
  • Constantly thanking the Lord!
Re: CTS
« Reply #9 on: September 18, 2013, 11:30:11 PM »
Glad to help ralphs a great guy, knows what he's doing , does amaxing freelance art and seps too let hin know Mike from evolutionary sent you
Logged
Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803 www.evolutionaryscreenprinting.com

Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2071
Re: CTS
« Reply #10 on: September 20, 2013, 09:30:22 PM »
This was posted on another thread here by Volker, my fellow German.They use this system in their printshop  the Print Palace in Germany. The fun starts around 8 minutes into the video.
çM
Logged

Offline easyscore

  • Full Member
  • ***
  • Posts: 105
Re: CTS
« Reply #11 on: September 21, 2013, 02:25:40 PM »
Speechless...
Logged

Offline DCSP John

  • Sr. Member
  • ****
  • Posts: 340
Re: CTS
« Reply #12 on: September 21, 2013, 03:55:28 PM »
wow.
Logged
Pages: [1]   Go Up
« previous next »