Author Topic: Anyone printed on Bella 8800's?  (Read 2109 times)

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Anyone printed on Bella 8800's?
« on: July 03, 2012, 10:57:52 AM »
3.7 oz 65% viscose/35% polyester

I'm not even sure what that means.  Is it like a burn out?


Offline aauusa

  • Hero Member
  • *****
  • Posts: 826
Re: Anyone printed on Bella 8800's?
« Reply #1 on: July 03, 2012, 11:36:00 AM »
it is similar to rayon.   just a man made fiber.

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Anyone printed on Bella 8800's?
« Reply #2 on: July 03, 2012, 01:49:41 PM »
So how does printing on rayon work?

This will be purple on "soft pink", I assume just roll with it.  Any curing tricks or gotchas I should worry about?

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7858
Re: Anyone printed on Bella 8800's?
« Reply #3 on: July 03, 2012, 03:13:01 PM »
you're fine, dark on light is easy on about any fabric.  just be sure to check your temps, some of these get a lot hotter than cotton a lot faster

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Anyone printed on Bella 8800's?
« Reply #4 on: July 03, 2012, 03:38:42 PM »
Thanks

Offline aauusa

  • Hero Member
  • *****
  • Posts: 826
Re: Anyone printed on Bella 8800's?
« Reply #5 on: July 03, 2012, 04:39:04 PM »
it is just normal printing just watch the heat and flashing if needed.  It is similar in the heat area as polyester is but very little  bleed unlike polyester.

Online Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Anyone printed on Bella 8800's?
« Reply #6 on: July 03, 2012, 05:12:45 PM »
3.7 oz 65% viscose/35% polyester

I'm not even sure what that means.  Is it like a burn out?

check out my new thread
That rug really tied the room together, did it not?

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Anyone printed on Bella 8800's?
« Reply #7 on: July 03, 2012, 05:19:41 PM »
You still typing it?

Online Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Anyone printed on Bella 8800's?
« Reply #8 on: July 03, 2012, 05:54:32 PM »
just posted, pesky clients!
That rug really tied the room together, did it not?