How would you print this?

[Prosperi-Tees]

Believe it or not this is the first time I am printing halftones on darks. Wondering how I should tackle this (mesh counts, print order, flash). It is going on brown hoodies. Thanks for your guys input.

[ebscreen]

I'd discharge it off the bat if at all possible. Way easier than anything else. If not possible...

I'm of the opinion that halftones fading into white look way better over a solid white rather than
just an underbase. As such:

White, flash, white, flash, maroon, gold, red.

Or if you don't have two flashes;

White, flash, maroon, gold, red, highlite white. Put the top white on a 230-280.

[3Deep]

If your going to print halftones over a solid white base I would flash those halftones to keep them clean, as they do tend to increase in size and muddy up printing wet on wet and your printing on hoodies too!!!

Darryl