Opportunity is missed by most people because it is dressed in overalls and looks like work. - Thomas Edison
Greetings:Allow me to offer some additional advice for using the Zipper Hoodie Pallets. First let us agree that not all zipper are the same. However - there is a great deal of agreement to the different brands. We machine the grove to be just slightly wider than the zipper. There has to be some play so that the zipper will locate into the slot in a reasonable amount of time without too much ministrations while loading. Also - we machine the slot to be very slightly deeper than necessary. It is expected that there may be some taping required in the channel to bring the print area to the perfect height.It has been reported to me by a number of people that they compensate within the artwork for the area that goes over the zipper. There are many ways to do this. But if you restrict the amount of ink over the area in question, it helps greatly. This works well because the zipper is located in the channel.We do offer the 1/4" neoprene rubber that can also be used for this application. It helps but has poor flash compatibility.Hope this helps.
Now the problem I have to figure out is how to cover the foam with something I can them tac so that the hoody stays put.
Quote from: mattleague on May 15, 2012, 10:15:20 AMNow the problem I have to figure out is how to cover the foam with something I can them tac so that the hoody stays put.why can't you just brush/roll/spray the foam?