registration device that mounts on the Z bar?

[244]

Ill snap pictuers of my home made rig later. I also have a set of templates for one a machine shop or someone handy could fab.

It is simply some alum flat bar 4" and 1" both 3/8", shoulder bolt, some bearing, set screw and 1/2" dowl pin. Nothing fancy but works just fine.

all you have to do is go to store.mrprint.com and punch in registration device in the search or you can punch in the part number 8089000-service and the device will pop up. You are on your own from there!!!

[jasonl]

and if I were your boss, I'd be pissed.  Those things are worth putting on digitsmith.  A tech will snap those up if they are in good shape, or a large shop that is in need of one for their maintenance dept.

That being said, I have thrown out a ton of stuff over the years only to realize I should have held onto it.

At that time my boss was the one who said chunk'em in the trash.  So I did what he said.

[jasonl]

we also had some no shirt detectors that he didnt even try to sell, we just threw them in the garbage.  Oh, and also a Koolmist.  Straight to the dumpster.  thats how he rolled!

[Prosperi-Tees]

Coulda chucked them in your truck!

[mk162]

jason, PM me the shop you used to work for, I am wondering if I've come across him before.

[Gilligan]

jason, PM me the shop you used to work for, I want to go dumpster diving there.

Fixed it for you Brad.

[mk162]

Thanks gilly!!!

Oh, and if you need an expo unit, the new one is going in as we speak. YAY!!

[Gilligan]

The 3140 is supposed to be picked up in California Tuesday.  Is the truck blows up and takes it with it, I'll let you know!

Let us know how that new monster is working out for you!  You might be able to cut down on labor with that thing... just get a vane female to come in there for the "free" tanning while she exposes your screens.

[spotcolorsupply]

Ill snap pictuers of my home made rig later. I also have a set of templates for one a machine shop or someone handy could fab.

It is simply some alum flat bar 4" and 1" both 3/8", shoulder bolt, some bearing, set screw and 1/2" dowl pin. Nothing fancy but works just fine.

all you have to do is go to store.mrprint.com and punch in registration device in the search or you can punch in the part number 8089000-service and the device will pop up. You are on your own from there!!!

Yup, Looks almost exactly like mine (Where is the spring at?)..

[mk162]

Heck no I am going to be soaking up those rays.  I will have to go topless because I hate tan lines.

[spotcolorsupply]

Heck no I am going to be soaking up those rays.  I will have to go topless because I hate tan lines.

Just another reason for me to knock before I come into your dark room 

[mk162]

Not a bad idea...after all, Image Technologies ITX emulsion is liquid sex.

[spotcolorsupply]

Not a bad idea...after all, Image Technologies ITX emulsion is liquid sex.

Give ma a lil time, Ill be pimipn some liquid sex very soon 

[mk162]

Sweet.  It is seriously the best photopolymer out there.

[Homer]

sweet, I actually got my hands on one. . . .any tips? TP, Bimm? you guys are probably laughing going -this jackass is going DOWN haha. . .