« previous next »
Pages: [1] 2   Go Down

Author Topic: Whose Gold ink do you use???  (Read 2917 times)

Offline Scobey Peterman

  • Sr. Member
  • ****
  • Posts: 498
Whose Gold ink do you use???
« on: May 02, 2012, 12:33:51 PM »
I want to p/f/p Gold on royal 100% cotton shirts.  Whose gold ink do you use??

Thanks.
Logged
Quality over Quantity

Offline Zelko-4-EVA

  • Hero Member
  • *****
  • Posts: 571
Re: Whose Gold ink do you use???
« Reply #1 on: May 02, 2012, 12:37:05 PM »
Wilflex Liquid Gold

Logged

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5681
Re: Whose Gold ink do you use???
« Reply #2 on: May 02, 2012, 01:41:09 PM »
Agreed
Logged

Offline Scobey Peterman

  • Sr. Member
  • ****
  • Posts: 498
Re: Whose Gold ink do you use???
« Reply #3 on: May 02, 2012, 01:53:48 PM »
I need it to be school bus gold.
« Last Edit: May 02, 2012, 02:27:12 PM by Scobey Peterman »
Logged
Quality over Quantity

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5681
Re: Whose Gold ink do you use???
« Reply #4 on: May 02, 2012, 02:21:25 PM »
Then Union Maxopaque gold
Logged

Offline JayzTeez

  • !!!
  • Sr. Member
  • ****
  • Posts: 373
  • Manual Screen Printer
Re: Whose Gold ink do you use???
« Reply #5 on: May 02, 2012, 03:29:18 PM »
WM Yellow Gold
Logged
Jayz Teez Screen Printing
Houtzdale, PA.

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: Whose Gold ink do you use???
« Reply #6 on: May 02, 2012, 04:05:04 PM »
We use the union maxopaque... though I prefer a white underlay for longer runs, with 2 screens, but you'll get what you're looking for your way too...

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: Whose Gold ink do you use???
« Reply #7 on: May 02, 2012, 04:26:51 PM »
Union Maxopake Golden Yellow.  It looks ok pfp but it looks better with a white UB.
Logged
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4278
Re: Whose Gold ink do you use???
« Reply #8 on: May 02, 2012, 04:37:16 PM »
There was a thread on a long lost board where a rep. from Union mentioned that the Maxopaques were
really intended for getting opacity on small fine line left chest stuff and not full coverage areas.

(PS with a PC system and thickener you can make your own opaques)
Logged

Offline sportsshoppe

  • !!!
  • Hero Member
  • *****
  • Posts: 649
  • A way of life.
Re: Whose Gold ink do you use???
« Reply #9 on: May 02, 2012, 04:40:54 PM »
one stroke
Logged

Offline Zelko-4-EVA

  • Hero Member
  • *****
  • Posts: 571
Re: Whose Gold ink do you use???
« Reply #10 on: May 02, 2012, 04:43:05 PM »
Quote from: ebscreen on May 02, 2012, 04:37:16 PM
There was a thread on a long lost board where a rep. from Union mentioned that the Maxopaques were
really intended for getting opacity on small fine line left chest stuff and not full coverage areas.

(PS with a PC system and thickener you can make your own opaques)

we have used Wilflex Amazing Base with our PC system to get a nice opaque shade that wasnt available in the Union Maxopaque series.   

Im going to try the thickener  - i have about 4 gallons of Rutland thickener #10 i need to use up. 
Logged

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Whose Gold ink do you use???
« Reply #11 on: May 02, 2012, 05:26:46 PM »
I'm using pre-CPSIA IC HP Golden Yellow, and though I prefer an underbase, I p-f-p plenty of times.
Yellow, however, does not cover as well as one owuld hope, but good EOM helps a lot.

Not part of your question, but when I have to match a Pantone, or a vinyl with a Pantone number, I have used my Union Mixopake system.
Last time, with Sun Yellow Easy Weed film from Siser (their redder Golden Yellow), I just added 1% Mixopake Red y/s to my IC.
Logged
That rug really tied the room together, did it not?

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4278
Re: Whose Gold ink do you use???
« Reply #12 on: May 02, 2012, 05:32:14 PM »
Quote from: Zelko-4-EVA on May 02, 2012, 04:43:05 PM
Quote from: ebscreen on May 02, 2012, 04:37:16 PM
There was a thread on a long lost board where a rep. from Union mentioned that the Maxopaques were
really intended for getting opacity on small fine line left chest stuff and not full coverage areas.

(PS with a PC system and thickener you can make your own opaques)

we have used Wilflex Amazing Base with our PC system to get a nice opaque shade that wasnt available in the Union Maxopaque series.   

Im going to try the thickener  - i have about 4 gallons of Rutland thickener #10 i need to use up.


Only familiar with the powdered stuff (Cab-O-Sil so they tell me) so don't come a gunnin' for me if the liquid
doesn't perform as intended!

Works for making HD's as well. Neat stuff.
Logged

Offline Screened Gear

  • Gonzo Member
  • ******
  • Posts: 2580
Re: Whose Gold ink do you use???
« Reply #13 on: May 02, 2012, 06:09:29 PM »
Quote from: alan802 on May 02, 2012, 04:26:51 PM
Union Maxopake Golden Yellow.  It looks ok pfp but it looks better with a white UB.

Yellow is one ink I print alot (and hate) i would strongly suggest an underbase. You can get away with it but with the underbase the color is perfect every time.
Logged

Offline jasonl

  • !!!
  • Hero Member
  • *****
  • Posts: 582
Re: Whose Gold ink do you use???
« Reply #14 on: May 02, 2012, 06:34:57 PM »
thats the color of my logo and it looks best with pms 1235 with white underbase or sericol discharge yellow rs.
Logged
"We Make Blank Shirts Look Awesome!"
Pages: [1] 2   Go Up
« previous next »