« previous next »
Pages: [1]   Go Down

Author Topic: ink for polyurethane  (Read 2013 times)

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
ink for polyurethane
« on: April 18, 2012, 09:51:28 AM »
I had a potential customer in yesterday, looking to get some polyurethane printed. It is a polyether based polyurethane, or so he told me, I'm unfamiliar with it. So, we're looking for an ink that 1) will stick, chemical bond, and 2) be abrasion resistant, due to rough treatment. Any ideas? I know an air dry epoxy would be pretty tough, but I'm concerned about the abrasion resistance...

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: ink for polyurethane
« Reply #1 on: April 18, 2012, 10:07:07 AM »
If anyone can help, it should be Naz Dar. They will even experiment with samples that you send them
But you knew that  ;D
Logged
That rug really tied the room together, did it not?

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: ink for polyurethane
« Reply #2 on: April 18, 2012, 11:05:25 AM »
I was hoping they were watching. Peter is it?
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: ink for polyurethane
« Reply #3 on: April 18, 2012, 02:23:34 PM »
skateboard wheels?
Logged

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: ink for polyurethane
« Reply #4 on: April 18, 2012, 03:22:48 PM »
can't say, it has a patent pending. Probably not going to make us rich, but will get the customer up and running at least. It's kind of like the next great t-shirt idea, except it's not a t-shirt or wearable at all. It's a (sound of gunshot)  aaaarrrrrrggggghhhhh!

Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: ink for polyurethane
« Reply #5 on: April 18, 2012, 04:59:22 PM »
Quote from: endless ink printing on April 18, 2012, 02:23:34 PM
skateboard wheels?

On that note, as a clay wheel user in the '60's, the Urethane wheels were a huge breakthough!
Did you know that they were born from the kicker wheels in a copier?

Logged
That rug really tied the room together, did it not?
Pages: [1]   Go Up
« previous next »