Heat Seal - Heat Press - Whatever you want to call it! > General Heat Seal

Looking for a digital contact thermometer

<< < (3/4) > >>

Frog:
The one I had, had a tip of about 1/2" on a three foot wire. The tip was the only "senser"
It could be taped down in various places on the rubber pad.

ebscreen:
All of mine are 7" plus.

Frog:
you can see the tiny tip on this one that I posted earlier. The link is to Amazon for about $25

Frog:
Actually closer to $35 with shipping, but I wouldn't be surprised if a little sleuthing wouldn't find it , or a similar one cheaper

Coyote71:
Thanks guys for all the links. I have a k type thermocouple for my fluke that is very simillar to the one frog showed. Problem is, there is about 150 degrees difference between the infared and the thermocouple. I know that there should not that much difference between the 2 thermos, thats whey I am trying to locate a third tool to try and see what the temps actually are. Will get the evilbay one a try and see of I can find some heat tape and test different areas of the element. Thanks guys

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version