Heat Seal - Heat Press - Whatever you want to call it! > General Heat Seal
A cad-cut trick I just learned
Frog:
My buddy Tom who does my cutting for me suggested that I add section cut lines or put "boxes" around the individual names or other designs to make weeding easier. That way, one doesn't have to wrestle with six feet of vinyl (or polyurethane)
Cutting apart before weeding, is not always an option, as with some materials, the cut pattern is difficult to discern.
This, has made the job much easier. ;)
inkman996:
Hey Frog I have a macro that automatically does that for you not sure if it works in the newer corel versions tho. My cut software also does it automatically for you maybe the guy you use has that feature and does not realize it.
Frog:
I can understand the automatic macro in Corel, if when laying out, you tell it what to do, but how does the cut software know the difference between a three line phrase and three names?
inkman996:
The cut software will place either vertical or horizontal lines anywhere there is a clear shot from one edge to the other. It does not matter whether it is a 3 line sentence or 3 separate names you still have to weed it.
Frog:
Okay, so rather than a series of boxes and/or stripes, it's more of a grid.
Navigation
[0] Message Index
[#] Next page
Go to full version