A Lil Help PLease

[killergraphics]

New shirt for me.

I'm thinking about running with paper on top of the tape.
100% poly
Any help would super.

Johnny

[whitewater]

wouldnt it being reflective not be a problem?  I may be wrong but when using reflective ink its hard to cure because of the reflectiveness?

do you have an extra one to run through?

[inkman996]

We run those often the taping makes it through the oven no problem.

[killergraphics]

So run it like a shirt?

I'm seeing a future separation problem with the tape.

You Have no F********Idea how much I miss TALKING to you.

Johnny

[inkman996]

Hey Johnny as of yet we never had a complaint about the integrity of these shirts after running. I run them like anything polyester not like cotton shirts. If you ran it through at tshirt temp it would probably shrivel, I adjust my height up and speed up the belt a little.

[blue moon]

Hey Johnny as of yet we never had a complaint about the integrity of these shirts after running. I run them like anything polyester not like cotton shirts. If you ran it through at tshirt temp it would probably shrivel, I adjust my height up and speed up the belt a little.

we run them as normal, no problem!

pierre

[stitches4815]

As Pierre said, I run them normal with no problem either.  They stink like hell though.

[killergraphics]

Thanks Guys.

[Sbrem]

normal, normal, normal. The tape is pretty tough.

Steve

[killergraphics]

Thanks Guys

Tack is a problem for me on these and this one is a little off spot.


And Yes it is a Jpeg.

[inkman996]

Holy crap batman you printed on the taping? WOW that I would not have expected. We never ever ever offer something like that!

[Frog]

Yeah, that's knda like giving the information out very slowly, as if it's on a "need to know" basis on NCIS, but Johnny, we really did need to know.

I have no idea if your plastisol will stay adhered to the tape. Wash test, and if there is a problem, I'd consider Nylo-bond or even look at doing it with printed vinyl.(even then there could be an adhesion problem similar to stacking certain color films)

[mk162]

That looks wicked cool.

[hazeremover]

Holy crap batman you printed on the taping? WOW that I would not have expected. We never ever ever offer something like that!

4 colors over that. You da man!

 I've never done that but the Nylo-bond is a logical step to R&D.

[inkman996]

I think it would have been a little less blurry if you printed the black first then the white over the top with a slight trap, to me white holds a better edge in situations like that.