"He who marches out of step hears another drum." ~ Ken Kesey
I have Wilcom ES65 and it is top notch. If you can muster the cost for Wilcom I am sure you will be very happy. I also have 3 training videos; digitizing, lettering & editing. Very boring yet extremely informative and interactive. I actually taught myself to digitize using this software and did all our digitizing for some time until the art side was too much that we contracted out our digitizing. It has all the drawing tools needed to design directly in the program yet it also accepts DXF files for which I would design in CorelDRAW, export and then open in Wilcom and most of the work was already completed. Essentially only having to assign fill types and such.
I use Pulse and I like it. I have Creator level, one above the basic level of Pulse.I do not have many drawing tools in it, bat I get around with doing most of the stuff in Illustrator, and converting all of it to shapes in Pulse.After I get the shapes, I do the manual settings for the stitch type, densities, underlay, pull, etc.
Brandt Wilcox is 100% professional digitizing software there is nothing at all you can do with it, you get down to single stitching one by one or use many of the drawing tools. I have Wilcox but I started out on old compucom software Wilcox is worth every penny.Fluid we bought our Wilcox second hand from a local that went out of business unfortunately he had no Manuals or training included so I am self taught in the software, there is literally never a day that goes by I don't learn something new with it.
Yes wilcox does that Brandt but seriously it's not neccesary you can create three columns and define the directions etc in seconds. When it comes to digitizing I never use vector I always work off of a raster. You can use the vector tools but for me it is quicker to digitize from scratch and the results are typically better. When doing from scratch you can set overlaps a lot easier and digitize indivual sections that might normally be part of one whole object as a vector.I use Wilcom ES6
Quote from: DKgrafix on February 05, 2012, 10:56:47 AMI use Pulse and I like it. I have Creator level, one above the basic level of Pulse.I do not have many drawing tools in it, bat I get around with doing most of the stuff in Illustrator, and converting all of it to shapes in Pulse.After I get the shapes, I do the manual settings for the stitch type, densities, underlay, pull, etc.How well is modern digitizing sofware at coverting shapes into useable/editable embroidery shapes. I mean our program does it now, but you can't really do much with it other than sew it. You can't for example in a H sew the vertical lines one way, and the horizontal line another.
Brandt Wilcom has full vector manipulation and creation as any graphic software, like I said tho I do not rely on it or anything to do with vector. But in your case since you do like it that way Wilcom might be great for you since you can manipulate vector easily. Wilcom also offers much much more than just that, what may or may not be benificial for you is any bodys guess, us personally one of its great features is the direct queing to the machine it is much faster the the compucon and has more features, for instance I have a color palette set up to match our 15 needles machine with the exact colors, I set the needles in wilcom and when the design arrives at the machine all the color changes are set.
Brandt, Wilcom is a way to go, but I do not think that Wilcom Deco Studio is powerful enough. If you have enough money, full blown version of Wilcom is great. Pulse, is i think a close second spot. I got it because it is sold with Tajima, and it can be hooked up to a Tajima via LAN cable and router. No need to use jump drive or floppies for designs.
Author
Topic: Digitizing software. (Read 7056 times)
