« previous next »
Pages: 1 [2]   Go Down

Author Topic: How would you print this?  (Read 7487 times)

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: How would you print this?
« Reply #15 on: November 04, 2011, 04:26:05 PM »
both noisy and painful, but whatcha gonna do?  :o
Logged
That rug really tied the room together, did it not?

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Re: How would you print this?
« Reply #16 on: November 04, 2011, 04:31:42 PM »
Quote from: Dottonedan on November 04, 2011, 04:24:27 PM
They've all got you covered on printing.  I'd like to say, that FROG craps thunders and piss's lightning.

Maybe he is Brave Heart and shoots .................Lightning bolts out of his arse
Logged
"No man is an island"

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: How would you print this?
« Reply #17 on: November 04, 2011, 04:46:39 PM »
Quote from: Fluid on November 04, 2011, 12:58:04 PM
butt registration and print Black and 1st white than flash and then white again.  Use a 230mesh or higher for your black and you shouldn't have to flash in between the black and the first white

Ditto

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5330
Re: How would you print this?
« Reply #18 on: November 04, 2011, 05:00:46 PM »
Dk,  sorry I didn't finish my thoughts I'd print the same as everyone was saying, on a manual you can't go wrong either way, your going to have 2 flashes anyway.
Logged
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline stiggy

  • Newbie
  • *
  • Posts: 5
Re: How would you print this?
« Reply #19 on: December 01, 2011, 05:45:42 PM »
Black first, white butt reggie second, and possibly a second slightly choked white third just a thought.
Logged

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: How would you print this?
« Reply #20 on: December 01, 2011, 05:56:35 PM »
Sorry, update coming.
This job printed 2 weeks ago and printed great. Black, white, flash, white. Only one white screen.
Will take pic, looked cool on dark gray heather.
Logged

Offline jasonl

  • !!!
  • Hero Member
  • *****
  • Posts: 582
Re: How would you print this?
« Reply #21 on: February 03, 2012, 04:32:54 PM »
3 screens for large run on auto.  white flash, black, white.  That simple.
Logged
"We Make Blank Shirts Look Awesome!"

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: How would you print this?
« Reply #22 on: February 03, 2012, 10:58:37 PM »
I wish I had big enough run for an auto. This was a 36 piece order
Printed Black/White/Flash/White
Logged

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: How would you print this?
« Reply #23 on: February 03, 2012, 11:31:48 PM »
Looks nice and clean.  Good job.
Logged
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline sweetts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1768
  • Simplicity is the ultimate sophistication DUH
Re: How would you print this?
« Reply #24 on: February 03, 2012, 11:41:41 PM »
Quote from: DKgrafix on February 03, 2012, 10:58:37 PM
I wish I had big enough run for an auto. This was a 36 piece order
Printed Black/White/Flash/White
What white ink are you using?
Logged
RT Screen Designs
Willowick Ohio
www.rtscreendesigns.com

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: How would you print this?
« Reply #25 on: February 04, 2012, 01:12:53 AM »
Quote from: sweetts on February 03, 2012, 11:41:41 PM
Quote from: DKgrafix on February 03, 2012, 10:58:37 PM
I wish I had big enough run for an auto. This was a 36 piece order
Printed Black/White/Flash/White
What white ink are you using?
I think this was a WM plastic Ultimate white. Since, I have switched to StreetFignter White
Logged

Offline Admiral

  • Hero Member
  • *****
  • Posts: 891
Re: How would you print this?
« Reply #26 on: February 07, 2012, 03:05:18 AM »
I would have done white / flash / black / 2nd white

but one problem I have is I can't flash black ink and white at the same time...quartz flash time needed for black ink is about 1.6secs vs almost 4sec for white ink - black ink would boil....

anyone else have this problem? this is with flash at normal position (2.5 inches from platen) and as high as it can go (3.5 if that)
Logged

Offline IntegrityShirts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1179
Re: How would you print this?
« Reply #27 on: February 07, 2012, 09:20:55 AM »
Wait, DK what kind of flash are you using? Is it auto or foot pedal controlled?

When I print on my manual I have an ir flash just sitting over a platen arm stationary.  Meaning it wouldn't matter what color I print first as I would rotate the pallets around for every screen.  Rather than rotate the screens back and forth between white/black AND rotate the pallets on the last two prints.

I'd have my flash sitting over station two of my 6/4 antec:

print all 4 blacks, every time I print it goes under the flash so black gets flashed
print white screen 8 times, again every time each pallet gets indexed station two is flashing so you don't really have to be careful taking them off the press.

I guess I feel like with my Antec it's easier to whip the pallets around than it is to move two screens back and forth quickly as they're spring-loaded and you can't really jerk them fast.  May take longer but works for me!

Logged

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: How would you print this?
« Reply #28 on: February 07, 2012, 11:11:53 AM »
Quote from: IntegrityShirts on February 07, 2012, 09:20:55 AM
Wait, DK what kind of flash are you using? Is it auto or foot pedal controlled?
The flash has a foot pedal, love that feature.
Logged
Pages: 1 [2]   Go Up
« previous next »