screen printing > General Screen Printing

Large hoodie order, any pointers?

<< < (2/3) > >>

siestasol:
Spray Web for large orders on hoodies or crewnecks. Top Bond for everything else...

bimmridder:
What equipment do you have, press wise?

Zelko-4-EVA:
we never had luck with the web tack... we print tons of hoodies, primarily black or dark that would need an underbase.  the web tack always turned to goo and stuck on the inside of the garment, or left residue on the inside of the garment.

we spray camie 375 - i usually buy 60 cans per month in the summer and 144 per month in the winter.   if there is a better way, we havent found it.  got to balance time on press vs the cost to clean up after...

3Deep:
We have a hood order on the floor that I'm not hyped at all about printing yet LOL,  we use web spray camie 385 as well and I set my off contact with 2 quarters and slow roll around, these are something we just don't rush on....but just take your time and make sure you place them in the tunnel with the hoods down if you're running an electric (IR) dryer I've burn a couple because the the hood was sticking up to high.

farmboygraphics:

--- Quote from: bimmridder on October 22, 2024, 11:00:15 AM ---What equipment do you have, press wise?

--- End quote ---

Diamondback S 6/8

Navigation

[0] Message Index

[#] Next page

[*] Previous page