screen printing > Screen Making

M&R CTS Needle Filter

(1/2) > >>

Admiral:
Anyone have an alternate source for these black needle filters?
https://www.mrprint.com/store/product/7990002/black-needle-filter-b-c

My order has been on backorder for 3 weeks and I was just told 2 more months on it.  That's after 5 phone calls and waiting to be called back an hour + and finally getting in touch.  Their service has gone way down hill.  I miss Rich Hoffman.

ThePrinter:
You can try and see if there is a comparable one on here.

https://www.digiprint-supplies.com/en/filters

Here is a one that might work, but do your diligence to make sure.

https://www.digiprint-supplies.com/en/digibase-small-capsule-filter-black-5-micron-hose-barb-8131-0500-ll-c

Admiral:

--- Quote from: ThePrinter on September 24, 2024, 12:35:56 PM ---You can try and see if there is a comparable one on here.

https://www.digiprint-supplies.com/en/filters

Here is a one that might work, but do your diligence to make sure.

https://www.digiprint-supplies.com/en/digibase-small-capsule-filter-black-5-micron-hose-barb-8131-0500-ll-c

--- End quote ---

Thanks for the suggestion, I may look further into it but may just wait until November too...I thought I could save $100 bucks getting this from the source. 

Closest I could find was this but I would have to reach out to check the full part number:
https://www.digitalprintsupplies.com/products/black-needle-filter-1

Doug S:
This is a close up of what I got when I ordered that part number.  You probably can’t see it but on the left the brand is “cobetter”

The top numbers and letters are Phpii b-inkpp0500ec
The bottom is 3en1811021

Maybe with that info you can find it elsewhere

Admiral:

--- Quote from: Doug S on September 24, 2024, 04:47:38 PM ---This is a close up of what I got when I ordered that part number.  You probably can’t see it but on the left the brand is “cobetter”

The top numbers and letters are Phpii b-inkpp0500ec
The bottom is 3en1811021

Maybe with that info you can find it elsewhere

--- End quote ---

Thanks! I ordered 2x of those, we will see if I do in fact get them in 1.5 weeks.

I probably could have opened up the CTS to see them as well...Anyway, this was more of a gripe with M&R haha.

Navigation

[0] Message Index

[#] Next page