« previous next »
Pages: [1]   Go Down

Author Topic: Transfers on acrylic/wool blend hats?  (Read 1879 times)

Offline rusty

  • Hero Member
  • *****
  • Posts: 504
Transfers on acrylic/wool blend hats?
« on: May 22, 2024, 12:02:46 PM »
Does anyone have experience or tips on heat pressing on hats that are 80% acrylic 20% wool?

Just did a test with a dtf transfer and its acceptable but you can still see the heat press marks. I am going to experiment with lowest heat I can get away with.

the logo and more important turnaround time doesnt allow for embroidery or anything else.

Thanks
Logged

Offline Admiral

  • Hero Member
  • *****
  • Posts: 890
Re: Transfers on acrylic/wool blend hats?
« Reply #1 on: May 22, 2024, 01:53:31 PM »
I know arcylic beanies do not work with heat press patches...

Perhaps try the dtf transfers centered with excess film that will cover the rest of the hat? it would probably still leave marks but maybe not at all as bad.
Logged

Offline rusty

  • Hero Member
  • *****
  • Posts: 504
Re: Transfers on acrylic/wool blend hats?
« Reply #2 on: May 22, 2024, 02:10:42 PM »
yeah thats what I am going to try or use a cut out teflon sheet to help with that
Logged

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Transfers on acrylic/wool blend hats?
« Reply #3 on: May 22, 2024, 02:31:39 PM »
how about steaming the marks afterwards?
Logged
That rug really tied the room together, did it not?
Pages: [1]   Go Up
« previous next »