Heat Seal - Heat Press - Whatever you want to call it! > General Heat Seal

Anyone using this heat press?

<< < (2/3) > >>

whitewater:
Don, is that what you use for your dtf?

ebscreen:

--- Quote from: mk162 on February 12, 2024, 09:38:56 AM ---
Get a GeoKnight or a Hix.

--- End quote ---

Both are made in the US and IME the quality shows. Plus HIX runs their own aluminum foundry to cast their
parts and that's just dang neat.

mk162:

--- Quote from: ebscreen on February 12, 2024, 12:32:06 PM ---
--- Quote from: mk162 on February 12, 2024, 09:38:56 AM ---
Get a GeoKnight or a Hix.

--- End quote ---

Both are made in the US and IME the quality shows. Plus HIX runs their own aluminum foundry to cast their
parts and that's just dang neat.

--- End quote ---

I've got a Hix press that's 20 years old.  Works great, I replace the gas shock once every 3 years or so and it keeps trucking along.

ebscreen:

--- Quote from: mk162 on February 12, 2024, 12:43:13 PM ---
I've got a Hix press that's 20 years old.  Works great, I replace the gas shock once every 3 years or so and it keeps trucking along.

--- End quote ---

I just looked at their parts store (we have a hat press from them, I converted it to auto/air but that's another story) and
they are one of the few OEMs that don't ream you on parts.

whitewater:
Thanks guys.

Navigation

[0] Message Index

[#] Next page

[*] Previous page