« previous next »
Pages: [1]   Go Down

Author Topic: smoothing orange peel print  (Read 4439 times)

Offline balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 985
smoothing orange peel print
« on: October 09, 2023, 04:44:26 PM »
I have some prints that look a little orange peeled. It is poly ink on camo hoodies. It looked fine inside when printing last week. I took them outside to get a picture and in the sun the prints are a little textured... Is there a good way to smooth the print after the fact?
Thanks,
Matt
Logged
When you dig grave will you make it shallow so that I can feel the rain?

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: smoothing orange peel print
« Reply #1 on: October 09, 2023, 04:51:49 PM »
heat press
Logged
That rug really tied the room together, did it not?

Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1093
Re: smoothing orange peel print
« Reply #2 on: October 09, 2023, 04:54:46 PM »
heatpress with teflon sheet give a shiny finish or brown paper gives flat finish for us.
Shane
Logged

Offline balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 985
Re: smoothing orange peel print
« Reply #3 on: October 09, 2023, 04:55:04 PM »
Do you have a suggestion on temp/time/pressure. I have a 1620 hotronix.
Thanks for the quick reply!
Logged
When you dig grave will you make it shallow so that I can feel the rain?

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: smoothing orange peel print
« Reply #4 on: October 09, 2023, 05:11:32 PM »
Quote from: balloonguy on October 09, 2023, 04:55:04 PM
Do you have a suggestion on temp/time/pressure. I have a 1620 hotronix.
Thanks for the quick reply!

300, 5 seconds, medium pressure should do the trick, however, that camo stuff has a bad repution for bleeding.
So, I'd see no harm in starting testing at a lower temp
« Last Edit: October 09, 2023, 05:13:39 PM by Frog »
Logged
That rug really tied the room together, did it not?

Offline balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 985
Re: smoothing orange peel print
« Reply #5 on: October 09, 2023, 05:54:30 PM »
Thank you. It is working pretty nicely.
Logged
When you dig grave will you make it shallow so that I can feel the rain?
Pages: [1]   Go Up
« previous next »