« previous next »
Pages: [1]   Go Down

Author Topic: air leak at dial  (Read 2159 times)

Offline Croft

  • Hero Member
  • *****
  • Posts: 875
air leak at dial
« on: January 24, 2022, 03:42:37 PM »
Any ideas why air is leaking from dial area , have had problem before but seemed to go away. Press wasn't used much over Christmas then we had a big cleanup . It seems
to be exhausting around the dial which really isn't ever touched. Adjusting dial makes no difference.
Logged

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5330
Re: air leak at dial
« Reply #1 on: January 24, 2022, 05:23:12 PM »
Just take it apart and check the rubber o-rings, might just to reseat the o-ring or tighten a little, after we came back from Christmas our press was a leaky mess but after a few days everything went back to normal.
Logged
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline Croft

  • Hero Member
  • *****
  • Posts: 875
Re: air leak at dial
« Reply #2 on: January 25, 2022, 08:32:37 AM »
Quote from: 3Deep on January 24, 2022, 05:23:12 PM
Just take it apart and check the rubber o-rings, might just to reseat the o-ring or tighten a little, after we came back from Christmas our press was a leaky mess but after a few days everything went back to normal.
I'll give that a try , but have been reading that this has a back feed option so may also be that spring?
Logged
Pages: [1]   Go Up
« previous next »