Author Topic: Anyone recommend a good emulsion coater?  (Read 5733 times)

Offline jesterapparel

  • !!!
  • Sr. Member
  • ****
  • Posts: 313
Anyone recommend a good emulsion coater?
« on: January 13, 2012, 02:03:32 PM »
Mine has a couple dings in it and leaving streaks on screens no matter what angle I try to put it on.
Over time the coating on the metal chips off I guess, cause I have never dropped it and keep pretty good care of it.
Anyone recommend one that will last awhile if treated well?

Thanks


Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Anyone recommend a good emulsion coater?
« Reply #1 on: January 13, 2012, 02:14:08 PM »
I find that the only really significant differences are how much they hold, and whether they are straight up or tipped in the "rest" position.

Many come with either edge protectors or one piece covers.
That rug really tied the room together, did it not?

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4278
Re: Anyone recommend a good emulsion coater?
« Reply #2 on: January 13, 2012, 02:21:31 PM »
We got one in from CCI as part of some deal and I really liked the way it looks. Straight up,
holds a lot, etc. Screen dude likes it too.

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7858
Re: Anyone recommend a good emulsion coater?
« Reply #3 on: January 13, 2012, 02:22:01 PM »
I like the ones made by AWT.  They are the gold anodized ones.  They have a single and double edge model.

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: Anyone recommend a good emulsion coater?
« Reply #4 on: January 13, 2012, 02:28:46 PM »
I got a AWT single edge one and I like it. But, the coater is pretty small which does not bother me, I do not coat a lot of screens at the time.

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5323
Re: Anyone recommend a good emulsion coater?
« Reply #5 on: January 13, 2012, 02:32:33 PM »
This might sound silly or dumb, but I take my scoop coaters and rub a pc of soft wood back and forth over the edges and that keeps then nick free and smoothe.  I use a very fine sandpaper once which just did a number on it, so I tried the wood and it seemed to work tons better.

Darryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7858
Re: Anyone recommend a good emulsion coater?
« Reply #6 on: January 13, 2012, 03:07:30 PM »
I try not to get nicks on it in the first place.  It messes up the coating process.

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: Anyone recommend a good emulsion coater?
« Reply #7 on: January 13, 2012, 03:18:39 PM »
I am a good coater.  I just do not do that anymore.  ::) ::)
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Anyone recommend a good emulsion coater?
« Reply #8 on: January 13, 2012, 03:29:25 PM »
Mine has a couple dings in it and leaving streaks on screens no matter what angle I try to put it on.
Over time the coating on the metal chips off I guess, cause I have never dropped it and keep pretty good care of it.
Anyone recommend one that will last awhile if treated well?

Thanks

did you try sanding those out?

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1883
Re: Anyone recommend a good emulsion coater?
« Reply #9 on: January 13, 2012, 03:39:21 PM »
John, I'll try to remember to bring mine down Sunday for you to look at. You can keep it and try it for a week or so. 
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA

Offline ScreenFoo

  • Gonzo Member
  • ******
  • Posts: 1296
  • Semper Fidelis Tyrannosaurus
Re: Anyone recommend a good emulsion coater?
« Reply #10 on: January 13, 2012, 03:45:58 PM »
I have more than a couple Tetko/Sefar (same channel), but it sits tilted, if you can't stand that, you don't want one.  I have a "Majestech" (or something) coater that has a tiny radius on the round side, and the tiny flanges on the bottom are extremely hard to grip without putting my thumb on the edge opposite the one I'm coating with.


+1 Pierre on touching up the edge--if you're careful and do it like you're sharpening a blade (i.e. don't just sand the nick, sand the whole edge) it works pretty well for me.
I'm wondering though, Darryl might be onto something--using a chunk of wood like a chefs iron, not actually taking material off, just straightening the edge...

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7858
Re: Anyone recommend a good emulsion coater?
« Reply #11 on: January 13, 2012, 03:47:02 PM »
Guys, they are $30.  I am not going to mess with trying to fix the edge.  I keep 2 on hand and coat with them for more than a year before upgrading them.  You just have to be careful with them...just like screens.

Offline Socalfmf

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1238
  • Lead, Follow or Get Out of the Way!
Re: Anyone recommend a good emulsion coater?
« Reply #12 on: January 13, 2012, 03:48:25 PM »
get a good piece of 300+ sandpaper and just start sanding....we do it regularly to keep it smooth as can be and we treat our scoop coater like gold...

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5323
Re: Anyone recommend a good emulsion coater?
« Reply #13 on: January 13, 2012, 04:32:38 PM »
I don't have nicks in my coaters I just like to rub the wood on them to keep them smoothe and yep the wood won't take anything off just smooths them out.  Keeping your coater very clean after coating will allso help keep a coater in good shape.

Darryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1883
Re: Anyone recommend a good emulsion coater?
« Reply #14 on: January 13, 2012, 04:49:00 PM »
I'm with MK on this. I want mine to be perfectly smooth and straight. I'll spend a few buck to make sure they are. (And mine ain't cheap!)
No offense Sam, but on this I disagree with you.
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA