Author Topic: Conversion of files  (Read 2353 times)

Offline stitches4815

  • !!!
  • Hero Member
  • *****
  • Posts: 537
Conversion of files
« on: July 23, 2020, 11:51:13 AM »
I was wondering if someone could possible convert 3 AI files for me.  I am using Corel X7 and they don't want to convert for me.  I probably should upgrade my Corel.

Thanks in Advance


Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: Conversion of files
« Reply #1 on: July 23, 2020, 12:11:18 PM »
What do you need them converted to? It's been a while, but I think a pdf works in Corel, maybe Frog can chime in, I've converted a few for him...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Conversion of files
« Reply #2 on: July 23, 2020, 12:40:40 PM »
Usually works fine. Newish version AI files, opened or placed in Illy and converted to pdf's are usually good to go in my CorelDRAW X6. (Unconverted text apparently benefits from "Placing")
Only complication is many times, previously grouped objects are now ungrouped. If I don't need to manipulate objects, I just "Select All" and Group.
Both Steve and a local buddy have done this for me when needed with success.
That rug really tied the room together, did it not?

Offline stitches4815

  • !!!
  • Hero Member
  • *****
  • Posts: 537
Re: Conversion of files
« Reply #3 on: July 23, 2020, 03:46:44 PM »
What do you need them converted to? It's been a while, but I think a pdf works in Corel, maybe Frog can chime in, I've converted a few for him...

Steve

If they can be converted to a PDF i would appreciate it.  I think my version of Corel may be a little out dated and I should probably upgrade.

Thanks,
Wade

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: Conversion of files
« Reply #4 on: July 23, 2020, 04:57:17 PM »
Sorry, got busy for a few hours. If you want to send them to me, I'll take care of it for you.    sbremner@imprintgraphics.com

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline royster13

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1975
Re: Conversion of files
« Reply #5 on: July 23, 2020, 10:16:47 PM »
Pretty sure with every new build of Illustrator, they devote a lot of time to make sure Corel does not open file 100% accurately....

Offline StinkyDaddy

  • Full Member
  • ***
  • Posts: 169
Re: Conversion of files
« Reply #6 on: July 26, 2020, 04:21:42 PM »
I have used the open source program Inkscape to get Corel files into something I can use in Illy. It might work the other way.

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: Conversion of files
« Reply #7 on: July 27, 2020, 10:12:44 AM »
I'm guessing you got your files converted?

Steve
I made a mistake once; I thought I was wrong about something; I wasn't