Mask printing platen

[Croft]

Here is a solution I came up with for printing face masks, both 2 and 3 layer have worked. This has worked way better than I expected and print flash print lines up perfect every time so far.

[screenxpress]

Here is a solution I came up with for printing face masks, both 2 and 3 layer have worked. This has worked way better than I expected and print flash print lines up perfect every time so far.

Sweet.  Nice thinking outside the box.  Now that you have a method, see if you can expand to maybe 6 or 8 at a time?  Koozie platens are usually 6 or 8. 

https://www.heatpressnation.com/products/stahls-heat-press-can-cooler-platen?variant=31373643579470&utm_source=google&utm_medium=cpc&utm_campaign=smart-shopping-shopify&keyword=&utm_source=google&utm_medium=cpc&gclid=Cj0KCQjwz4z3BRCgARIsAES_OVfr3EwKjdDqhNvfUfVbt9WTA1b_Dl_Bip9saf5_O5YBv5ua5vqwyzYaAlowEALw_wcB

[Croft]

Here is a solution I came up with for printing face masks, both 2 and 3 layer have worked. This has worked way better than I expected and print flash print lines up perfect every time so far.

Sweet.  Nice thinking outside the box.  Now that you have a method, see if you can expand to maybe 6 or 8 at a time?  Koozie platens are usually 6 or 8. 

https://www.heatpressnation.com/products/stahls-heat-press-can-cooler-platen?variant=31373643579470&utm_source=google&utm_medium=cpc&utm_campaign=smart-shopping-shopify&keyword=&utm_source=google&utm_medium=cpc&gclid=Cj0KCQjwz4z3BRCgARIsAES_OVfr3EwKjdDqhNvfUfVbt9WTA1b_Dl_Bip9saf5_O5YBv5ua5vqwyzYaAlowEALw_wcB

I may do that , I kind of think the masks will fizzle out in 6-10 months .  I have 6 of these on our manual so we can crank out 700- 1000 an hour pretty easy so far.