Author Topic: Mask printing platen  (Read 1474 times)

Offline Croft

  • Hero Member
  • *****
  • Posts: 875
Mask printing platen
« on: June 12, 2020, 10:32:57 AM »
Here is a solution I came up with for printing face masks, both 2 and 3 layer have worked. This has worked way better than I expected and print flash print lines up perfect every time so far.


Offline screenxpress

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2434
Re: Mask printing platen
« Reply #1 on: June 12, 2020, 01:06:32 PM »
Here is a solution I came up with for printing face masks, both 2 and 3 layer have worked. This has worked way better than I expected and print flash print lines up perfect every time so far.

Sweet.  Nice thinking outside the box.  Now that you have a method, see if you can expand to maybe 6 or 8 at a time?  Koozie platens are usually 6 or 8. 

https://www.heatpressnation.com/products/stahls-heat-press-can-cooler-platen?variant=31373643579470&utm_source=google&utm_medium=cpc&utm_campaign=smart-shopping-shopify&keyword=&utm_source=google&utm_medium=cpc&gclid=Cj0KCQjwz4z3BRCgARIsAES_OVfr3EwKjdDqhNvfUfVbt9WTA1b_Dl_Bip9saf5_O5YBv5ua5vqwyzYaAlowEALw_wcB
« Last Edit: June 12, 2020, 01:10:49 PM by screenxpress »
Anything important is never left to the vote of the people. We only get to vote on some man; we never get to vote on what he is to do.  Will Rogers

Offline Croft

  • Hero Member
  • *****
  • Posts: 875
Re: Mask printing platen
« Reply #2 on: June 12, 2020, 02:41:17 PM »
Here is a solution I came up with for printing face masks, both 2 and 3 layer have worked. This has worked way better than I expected and print flash print lines up perfect every time so far.

Sweet.  Nice thinking outside the box.  Now that you have a method, see if you can expand to maybe 6 or 8 at a time?  Koozie platens are usually 6 or 8. 

https://www.heatpressnation.com/products/stahls-heat-press-can-cooler-platen?variant=31373643579470&utm_source=google&utm_medium=cpc&utm_campaign=smart-shopping-shopify&keyword=&utm_source=google&utm_medium=cpc&gclid=Cj0KCQjwz4z3BRCgARIsAES_OVfr3EwKjdDqhNvfUfVbt9WTA1b_Dl_Bip9saf5_O5YBv5ua5vqwyzYaAlowEALw_wcB

I may do that , I kind of think the masks will fizzle out in 6-10 months .  I have 6 of these on our manual so we can crank out 700- 1000 an hour pretty easy so far.