Author Topic: Why I like my Wax CTS  (Read 1797 times)

Offline Maxie

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1328
Why I like my Wax CTS
« on: April 20, 2020, 08:51:32 AM »
One of the reasons I like my wax CTS.       I switched it off for 3 weeks.     Came in this week to prepare a few screens, headed it up and got a perfect jet test.
My Epson printers I have to print tests and clean all the time.    I'm sure it's the same for pigment based CTS.
Maxie Garb.
T Max Designs.
Silk Screen Printers
www.tmax.co.il


Offline brandon

  • Gonzo Member
  • ******
  • Posts: 1709
Re: Why I like my Wax CTS
« Reply #1 on: April 20, 2020, 11:34:52 AM »
This right here is why when we upgrade that is what we are doing. Living in hurricane alley of New Orleans this is great. The main drawback of the ink based systems.

Online zanegun08

  • Hero Member
  • *****
  • Posts: 688
Re: Why I like my Wax CTS
« Reply #2 on: April 20, 2020, 05:31:20 PM »
Having dealt with both, wax is the bees knees

Exile, Douthitt, Kiwo, if you go wax you'll never look back, just forward to non consumable as that improves and comes down in cost

Offline brandon

  • Gonzo Member
  • ******
  • Posts: 1709
Re: Why I like my Wax CTS
« Reply #3 on: April 20, 2020, 06:57:48 PM »
Absolutely. I would prefer to pass wax on go on to non consumable at some point

Offline DannyGruninger

  • Gonzo Member
  • ******
  • Posts: 1220
Re: Why I like my Wax CTS
« Reply #4 on: April 20, 2020, 07:09:07 PM »
Absolutely. I would prefer to pass wax on go on to non consumable at some point

But even with a laser type system you will eventually have to replace the lasers/light source so imo every system out there has a consumable cost.
Danny Gruninger
Denver Print House / Lakewood Colorado
https://www.instagram.com/denverprinthouse

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Why I like my Wax CTS
« Reply #5 on: April 20, 2020, 09:14:31 PM »
Good point Danny.

Offline BP

  • Sr. Member
  • ****
  • Posts: 380
Re: Why I like my Wax CTS
« Reply #6 on: April 21, 2020, 08:18:36 AM »
Wax is so nice to use. We have had wax for 8 months and no problems. I have used a I-Image and it was a pain from the start.
SHIRT HAPPENS!

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1883
Re: Why I like my Wax CTS
« Reply #7 on: April 21, 2020, 08:57:15 AM »
I have both. I have an M&R STE and a wax (I-Jet) Each one has pluses and minuses. During busy time we run both machines for throughput reasons. We've been CTS almost 15 years now. 
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA