Author Topic: District DM130 waterbased or discharge  (Read 1283 times)

Offline cclaud3

  • Sr. Member
  • ****
  • Posts: 270
District DM130 waterbased or discharge
« on: January 23, 2020, 09:31:02 AM »
I have 100 each of DM130 in Green Frost & Purple Frost. Being triblends and typically the worst discharge colors Kelly green & purple, I'm assuming they won't discharge clean. Leaning towards regular waterbased, but concerned about bleed. I have a full matsui lineup including bleed blocker. Anybody run these 2 specific models in these colors either discharge or waterbased without bleed blocker? I will do some testing later today but just curious before we start that.

2 color print on front, 5 colors on back. Solid vector art. Thanks


Offline IntegriTees

  • Full Member
  • ***
  • Posts: 178
Re: District DM130 waterbased or discharge
« Reply #1 on: March 02, 2020, 09:56:02 AM »
what did you end up figuring out?  Did you run with bleed blocker?

Offline cclaud3

  • Sr. Member
  • ****
  • Posts: 270
Re: District DM130 waterbased or discharge
« Reply #2 on: March 02, 2020, 10:39:41 AM »
We ultimately printed non-discharge waterbased and they looked great. I did test both shirt colors with white discharge prints and the green dm130 was fine. Purple dm130 was muted and I would not recommend for discharge.

 No bleed blocker
« Last Edit: March 15, 2020, 07:38:16 AM by cclaud3 »