How Should i Print on Camo

[sirsean]

Hello guys i have an order of code V camo tees to print, the job is 2 colors Black & Gold front & back, which Low cure base barrier should i use to eliminate migration, thanks in advance?

[BP]

All brands are good and will work but most are way to thick. I use rutland and mix 25% of poly white ink into it and then it prints nice.

[StinkyDaddy]

Not sure about code V, but I've printed A4 poly camo with Wilflex Bleed Blocker. It tends to be thick as BP said about Rutland, I add viscosity buster to get it to move better.

[easyrider1340]

I’ve got an order this week with Code V also (but hoodies).  I spoke with One Stroke yesterday, and I’m going to use ELT digital black as underbase. 

Terry

Sent from my iPhone using Tapatalk

[BP]

I’ve got an order this week with Code V also (but hoodies).  I spoke with One Stroke yesterday, and I’m going to use ELT digital black as underbase. 

Terry

Sent from my iPhone using Tapatalk

I used to use one stroke digital black. the pit fall is that if you are printing a light color the black UB is hard to cover.

[3Deep]

I was wondering about that (digital black) as my rep was telling me about it, I was kind of thinking using a black for an underbase would cause problems with the top colors.  I will say the ELT-S inks have been really good for bleeders, we just printed a bunch of sport-tek black double stroked and flash with top colors and the white is still nice, printed thru a 135 s-mesh with low print pressure.

[sirsean]

Thanks guys, I was going to try the black base as well, but since its will be hard to come back over it with colors i will just go with the grey base, thanks again!