« previous next »
Pages: [1]   Go Down

Author Topic: Does anyone know what this is and how to fix it?????  (Read 1872 times)

Offline Scobey Peterman

  • Sr. Member
  • ****
  • Posts: 498
Does anyone know what this is and how to fix it?????
« on: December 12, 2019, 01:03:59 PM »
Thanks
« Last Edit: December 12, 2019, 01:06:00 PM by Scobey Peterman »
Logged
Quality over Quantity

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Does anyone know what this is and how to fix it?????
« Reply #1 on: December 12, 2019, 01:53:03 PM »
So, can we assume that this was while attempting to print a file? Have you tried again? Only on this file?
Logged
That rug really tied the room together, did it not?

Offline CBCB

  • !!!
  • Sr. Member
  • ****
  • Posts: 490
Re: Does anyone know what this is and how to fix it?????
« Reply #2 on: December 12, 2019, 03:00:58 PM »
What’s the file size?

The message leads me to think the USB bus crashed for some reason. Possibly from sending too big or a corrupted file through.

Is it this file only? Perhaps try saving it as another format, like .eps first.


Sent from my iPhone using Tapatalk
Logged

Offline Scobey Peterman

  • Sr. Member
  • ****
  • Posts: 498
Re: Does anyone know what this is and how to fix it?????
« Reply #3 on: December 13, 2019, 05:48:39 AM »
It is any file I send to my HP2200 from my Mac computer.   However, my old Mac still prints to the HP2200.

It has to something in my newer Mac.  This just started this week.  I have had my new Mac about 2 years now
Logged
Quality over Quantity

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: Does anyone know what this is and how to fix it?????
« Reply #4 on: December 13, 2019, 07:53:53 AM »
Have you tried uninstalling the printer on the newer Mac, then reinstalling? When I've had the occasional burp like this, that's been the fix than normally works for me.

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Command-Z

  • !!!
  • Hero Member
  • *****
  • Posts: 956
Re: Does anyone know what this is and how to fix it?????
« Reply #5 on: December 13, 2019, 03:41:18 PM »
Could be the USB port. Are you going through a hub? If so, try plugging directly to the computer ports.

Logged
Design, Illustration and Color Separation for the Imprinted Apparel Industry for over 20 years. SeibelStudio.com
 Custom art not in the budget? Check out Bad Bonz Designs

Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1610
  • Ink and Chemical Product Manager
Re: Does anyone know what this is and how to fix it?????
« Reply #6 on: December 13, 2019, 04:01:28 PM »
Did you do the OS update?

Printer driver may not be updated.  This was a thing a couple months ago.
Logged
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.

Offline Jepaul

  • Full Member
  • ***
  • Posts: 127
  • www.youngonecorporation.com
Re: Does anyone know what this is and how to fix it?????
« Reply #7 on: December 13, 2019, 10:11:01 PM »
You lost me at MAC
Logged

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: Does anyone know what this is and how to fix it?????
« Reply #8 on: December 14, 2019, 12:16:43 PM »
No man, it's Mac; MAC is a network thingy... ;D

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Scobey Peterman

  • Sr. Member
  • ****
  • Posts: 498
Re: Does anyone know what this is and how to fix it?????
« Reply #9 on: December 16, 2019, 06:39:13 AM »
Thanks for all of the suggestions.

I will try them all until I know it works the way I want it to.

Thanks again.
Logged
Quality over Quantity
Pages: [1]   Go Up
« previous next »