New to old computer

[3Deep]

I know xp is way out and 7 is on the way out but is it possible to set up your new computer with all your art programs and network the art over to the older computer for printing, I know I said that all wrong.  the reason is I've upgraded computers before and had fits getting my rip programs to work with my printers, I still have an old 3000 that prints perfect along side of the 1430 and I use both the 3000 which some of you know prints up to a 17x22

[cbjamel]

win 10 should see the old xp but not the other way.
Save file then move it over to xp or maybe be able print to it form win 10 to xp.

Shane

[Frog]

If you're sending new art files to the old computer, if that computer is not running the same version of your graphics software, make sure that the files are saved down to whatever version of the graphic software is installed.

[3Deep]

This sounds about what I was thinking of, we've upgraded computers before and had to change printers, software etc and that was a pain in the booty.

[blue moon]

get a new computer and try to configure everything. If you can get it going you are golden. If there are issues use the old computer until you sort it out. Going away from obsolete operating systems makes sense. . .

pierre

[screenxpress]

get a new computer and try to configure everything. If you can get it going you are golden. If there are issues use the old computer until you sort it out. Going away from obsolete operating systems makes sense. . .

pierre

Always the best approach when upgrading.  I always start from a new Case, MB, HD, etc, etc.  Can always use the old pc when needed.