« previous next »
Pages: [1]   Go Down

Author Topic: Reflective Heat Seal vinyl  (Read 2571 times)

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Reflective Heat Seal vinyl
« on: October 09, 2019, 10:17:20 AM »
I have a potential order for 200 jackets with waterproofing, that need reflective vinyl on the left front, the right sleeve, and full back. I do not want to cut and weed that, and haven't had a lot of time to run a supplier down for that, TE doesn't offer it, nor does Howard. Any suggestions, and thanks in advance

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline twins

  • Verified/Junior
  • **
  • Posts: 14
Re: Reflective Heat Seal vinyl
« Reply #1 on: October 09, 2019, 11:21:18 AM »
Apex has some nice reflective stuff.

https://www.apextransfers.com/
Logged

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: Reflective Heat Seal vinyl
« Reply #2 on: October 09, 2019, 11:40:04 AM »
Quote from: twins on October 09, 2019, 11:21:18 AM
Apex has some nice reflective stuff.

https://www.apextransfers.com/



Thanks, I just sent in an RFQ

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Reflective Heat Seal vinyl
« Reply #3 on: October 09, 2019, 11:45:23 AM »
stahls will CAD Cut from 3M material which pretty tough and very reflective (and ANSI compliant). Expensive though. . .

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline royster13

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1975
Re: Reflective Heat Seal vinyl
« Reply #4 on: October 10, 2019, 12:11:53 AM »
Just make sure the waterproofing does not "mess up" adhesion....And sometimes the problem will not arise until the 1st few trips through the washer and dryer....
Logged

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: Reflective Heat Seal vinyl
« Reply #5 on: October 10, 2019, 09:08:56 AM »
Apex can screen them, they are sending me a sample to test on the jacket for adhesion, and to also see if the mesh lining leaves an impression. Thanks for the tip about Stahl's, Pierre, I looked at TE and didn't think to check the parent company.

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't
Pages: [1]   Go Up
« previous next »