Author Topic: Parts Washer and 701  (Read 1039 times)

Offline farmboygraphics

  • Hero Member
  • *****
  • Posts: 621
Parts Washer and 701
« on: September 20, 2019, 12:45:24 PM »
Is anyone using a parts washer with full strength 701 (or similar chem)? I'd like to give it a try for (plastisol only) floods and squeegees.   
Tees and Coffee


Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: Parts Washer and 701
« Reply #1 on: September 20, 2019, 01:56:22 PM »
i love 701 for cleaning SQ/FL but not sure of using it in a parts washer. We use ECO-WASH from CCI here. I would call PJ with easi way. He can answer any questions.704.604.9510
Specializing in shop assessment's, flow and efficiency

Offline 1964GN

  • Hero Member
  • *****
  • Posts: 833
Re: Parts Washer and 701
« Reply #2 on: September 21, 2019, 06:27:07 AM »
We use mineral spirits in the parts washer for cleaning squeegees and flood bars.

Offline Mystery

  • Verified/Junior
  • **
  • Posts: 15
Re: Parts Washer and 701
« Reply #3 on: September 21, 2019, 10:55:50 AM »
We swapped out mineral spirits for EASI-WAY 842 in our washer. Would never go back.

Offline Ross_S

  • Sr. Member
  • ****
  • Posts: 349
Re: Parts Washer and 701
« Reply #4 on: September 21, 2019, 11:53:17 AM »
I use the Smart Washer that Hoffman use to have at the shows a few years ago.  It's been the best thing for cleaning squeegees and floodbars that I've used in the last 20 years

Offline CBCB

  • !!!
  • Sr. Member
  • ****
  • Posts: 490
Re: Parts Washer and 701
« Reply #5 on: September 21, 2019, 12:56:06 PM »
We swapped out mineral spirits for EASI-WAY 842 in our washer. Would never go back.

We’ve been using 701, 3:1 with water!


Sent from my iPhone using Tapatalk

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: Parts Washer and 701
« Reply #6 on: September 22, 2019, 12:46:44 AM »
I use the Smart Washer that Hoffman use to have at the shows a few years ago.  It's been the best thing for cleaning squeegees and floodbars that I've used in the last 20 years

I ended up hating that thing.  It took longer to clean everything and then I had to rinse it off or everything was sticky.  And I also got sick of the smell.

Offline Maxie

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1328
Parts Washer and 701
« Reply #7 on: September 22, 2019, 05:10:51 AM »
I built my own, sits in the corner of my wash out sink.
S/s baking tray that drains into an emulsion bucket with a pump on it.
When the chemicals are old I just put in a bucket with fresh chemicals.
I use Saati IR26 diluted 1/4.     Works well.
Maxie Garb.
T Max Designs.
Silk Screen Printers
www.tmax.co.il