« previous next »
Pages: [1]   Go Down

Author Topic: Need New DTG Partner  (Read 3001 times)

Offline brandon

  • Gonzo Member
  • ******
  • Posts: 1709
Need New DTG Partner
« on: August 16, 2019, 05:33:57 PM »
Hey everyone,

So the two buddies we were using for our DTG needs have closed shop. Both have moved on to greener pastures. (not screen printing ha)

Anyone on here up to small jobs (a dozen here and there or maybe 100 pieces) every now and then?

Looking to get into DTG next year but definitely need some help in the meantime. Thanks everyone

Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Need New DTG Partner
« Reply #1 on: August 17, 2019, 04:14:54 AM »
We can, but might be too expensive.. what are you looking to spend and what qty per month?
Also, did you ask Jacob?
Pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: Need New DTG Partner
« Reply #2 on: August 17, 2019, 09:41:44 AM »
We do like Air Conway in Philly, I know they aren't on the board, but they are reasonable, and good at it. Over the last 6 - 7 years we had two problems, and they made it right immediately each time. 12 pieces minimum.

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Need New DTG Partner
« Reply #3 on: August 17, 2019, 01:33:57 PM »
Quote from: Sbrem on August 17, 2019, 09:41:44 AM
We do like Air Conway in Philly, I know they aren't on the board, but they are reasonable, and good at it. Over the last 6 - 7 years we had two problems, and they made it right immediately each time. 12 pieces minimum.

Steve
I have sent ppl there and never heard complaints. The only issue is that they use Kornits which have limited color gamut compared to the other DTG units (has to do with wet pretreatement).
Pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!
Pages: [1]   Go Up
« previous next »