CCI D-White, Discharge White

[jasonl]

Please say someone has luck with cci d-white with plastisol on top!  Testing their product tomorrow.

[Prosperi-Tees]

Please say someone has luck with cci d-white with plastisol on top!  Testing their product tomorrow.

I know Alan didn't like it but I have done a few jobs with plastisol on top. The hand could be better though. Someone said they mixed white and clear for a better hand but I have yet to try it

[alan802]

Please say someone has luck with cci d-white with plastisol on top!  Testing their product tomorrow.

It did not work at all.  The print cracked horribly.

Please say someone has luck with cci d-white with plastisol on top!  Testing their product tomorrow.

I know Alan didn't like it but I have done a few jobs with plastisol on top. The hand could be better though. Someone said they mixed white and clear for a better hand but I have yet to try it

How did you get it not to crack?  I just did the D-White with a short flash then white plastisol on top.  I also did one with red union ultrasoft and those cracked as well, but it wasn't as noticeable. 

[Prosperi-Tees]

I'm not sure Alan, I used QCM as the plastisol in a 230 on the manual. I did several wash tests and they came out fine. I have used a red and a green as well, I also flashed for about 6 seconds.

[ebscreen]

We've found that dryer dwell time must be longer than for discharge when there is plastisol on top.

[jasonl]

what about if you use the clear discharge, does that make a difference?

[jsheridan]

what about if you use the clear discharge, does that make a difference?

That's how I've always done it. I can't see the d-white working as an under for plastisol, it's to thick and meant to be a stand alone white.

[Prosperi-Tees]

The hand is heavy for plastisol, I am going to try 80/20 clear/white next time I put plastisol on top and see how that works.

[Printhouse]

I finally broke down and ordered some things to play with Discharge this week.  I ended up with a gallon of the Ryonet Discharge White, which could just actually be the CCI D-White.  The results were very impressive.  after one wash the hand is great.  I was pretty impressed with the entire process.  I would love to perfect this and get away from the P-F-P with simple white ink prints.

[Prosperi-Tees]

I finally broke down and ordered some things to play with Discharge this week.  I ended up with a gallon of the Ryonet Discharge White, which could just actually be the CCI D-White.  The results were very impressive.  after one wash the hand is great.  I was pretty impressed with the entire process.  I would love to perfect this and get away from the P-F-P with simple white ink prints.

that is what I have done for the most part, if your dryer can keep up I think it's a no brainer

[jsheridan]

My 2 gallons plus activator were dropped off by my local CCI rep yesterday 

[Prosperi-Tees]

Mine came today, 4 gallons of white, 4 gallons of base and 4 gallons of emulsion!

[Printhouse]

Now moving up from my old 24 inch AWT dryer to the 54 inch Vastex is really going to pay off!

[sweetts]

I just printed with the d white, it's bright but thicker then I thought it would be maybe. What mesh count did you guys use? I used a 110 then a 156 but think 200 would good


RT Screen Designs
www.rtscreendesigns.com

[ScreenPrinter123]

I just printed with the d white, it's bright but thicker then I thought it would be maybe. What mesh count did you guys use? I used a 110 then a 156 but think 200 would good

RT Screen Designs
www.rtscreendesigns.com

We have found 150S to be the best compromise when doing one stroke and still getting good penetration.  A 200 would work but based on my experience it would likely require 2 strokes.  Have you washed it yet?  That will help with the hand as it will lose its chalkiness.