Author Topic: I need help with a Word doc  (Read 3202 times)

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
I need help with a Word doc
« on: December 19, 2011, 02:44:21 PM »
I have a Word doc that I need as a pdf or eps or cdr that I can then manipulate for a cutting job.
Thanks in advance
That rug really tied the room together, did it not?


Offline Command-Z

  • !!!
  • Hero Member
  • *****
  • Posts: 956
Re: I need help with a Word doc
« Reply #1 on: December 19, 2011, 03:00:22 PM »
Just some type... font is live and came up as Ariel, so I don't know if that's correct... you might want to proof it with the customer.
Design, Illustration and Color Separation for the Imprinted Apparel Industry for over 20 years. SeibelStudio.com
 Custom art not in the budget? Check out Bad Bonz Designs

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: I need help with a Word doc
« Reply #2 on: December 19, 2011, 03:12:16 PM »
I am showing some calculus. . . Is that right?

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: I need help with a Word doc
« Reply #3 on: December 19, 2011, 03:31:34 PM »
See if this is what the custy sent in.  Opened in Word and exported as PDF.

D

Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: I need help with a Word doc
« Reply #4 on: December 19, 2011, 03:46:50 PM »
Very strange. Both open fine in Acrobat Reader, but in CoreDRAW, Here are the results. (I guess the Corel haters can gloat, lol!)

Dan's condensed and swapped x's and dots and place savers, and Command's added funny lines.

The customer just called and said that at least these are not even a Christmas rush, so if need be, I will figure out math symbols and just re-do the type.

As for their significance, Pierre, I have no idea.
That rug really tied the room together, did it not?

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: I need help with a Word doc
« Reply #5 on: December 19, 2011, 04:21:17 PM »
Very strange. Both open fine in Acrobat Reader, but in CoreDRAW, Here are the results. (I guess the Corel haters can gloat, lol!)

Dan's condensed and swapped x's and dots and place savers, and Command's added funny lines.

The customer just called and said that at least these are not even a Christmas rush, so if need be, I will figure out math symbols and just re-do the type.

As for their significance, Pierre, I have no idea.


can you use something like this?
http://traxel.com/pipermail/ai/attachments/20111219/68b06d10/attachment.jpg
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: I need help with a Word doc
« Reply #6 on: December 19, 2011, 04:25:43 PM »
I can't use any pixel based file as this is being cut on a plotter.
That rug really tied the room together, did it not?

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: I need help with a Word doc
« Reply #7 on: December 19, 2011, 06:23:12 PM »
I can't use any pixel based file as this is being cut on a plotter.


sorry, this has been bugging me the whole day. Here's what it is:
http://en.wikipedia.org/wiki/Maxwell%27s_equations

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: I need help with a Word doc
« Reply #8 on: December 19, 2011, 06:27:06 PM »
Yeah, he was just here and told me what it was. I hadn't had time to get back to you yet, but I see it finally clicked.

He's essentially saying in mathish, "let there be light!"
That rug really tied the room together, did it not?

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: I need help with a Word doc
« Reply #9 on: December 19, 2011, 06:32:36 PM »
Yeah, he was just here and told me what it was. I hadn't had time to get back to you yet, but I see it finally clicked.

what's funny, is I have seen those or the simpler version of it in several different schools over a period of almost 15 years. Actually had a class specifically dealing with the subject matter at one point in time, it's just that it was so long so I could not remember any of it. It seemed like something that I should recognize though. Thus the nagging feeling . . .

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: I need help with a Word doc
« Reply #10 on: December 19, 2011, 09:10:49 PM »
Okay guys, the client went back to the drawing board and sent me a pdf, which opens for me.
So, although the fonts change, we may be in business.
The formula being a Word object seems to really bugger it up because he also sent me a cdr that just shows a bounding box for the formula when I view as wire frame.

The pdf, however may be quite usable.
I'm keeping my fingers crossed that he gives me the O.K. on the version I sent back.

Thanks all.
That rug really tied the room together, did it not?

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: I need help with a Word doc
« Reply #11 on: December 20, 2011, 09:39:33 AM »
Okay guys, the client went back to the drawing board and sent me a pdf, which opens for me.
So, although the fonts change, we may be in business.
The formula being a Word object seems to really bugger it up because he also sent me a cdr that just shows a bounding box for the formula when I view as wire frame.

The pdf, however may be quite usable.
I'm keeping my fingers crossed that he gives me the O.K. on the version I sent back.

Thanks all.

I am being told that he is missing the bottom part which says: "and there was light!"
might want to ask your customer . . .

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!