Author Topic: screen registration system  (Read 2550 times)

Offline lancasterprinthouse

  • Full Member
  • ***
  • Posts: 209
Re: screen registration system
« Reply #15 on: March 11, 2019, 04:33:09 PM »
I choke my underbase a little more then I usually do on the manual. Gives me some forgiveness if I can't quite get the top colors to be 100% dialed in. I'm thinking of getting a roll of that clear registration tape so I can make multiple adjustments/test prints without going through a ton of scrap shirts.

I have been starting to do a lot of cmyk and sim process, and I don't have a tri-loc. So what I have been doing is after a basic registration for all the screens to a film, I will print the first color down, or the most dominate color (usually magenta to start) and then put clear tape over that print and print the next color. If its in reg, great. If not I just wipe the ink off and adjust until I get it right. and then do so for each color.

It's an old school way and it has helped get really good at the micros on the diamondback I have. And I only waste a pellon or one shirt.

I did that today with a simple 2 color design. Worked great actually. Tri-loc got me most the way there but was still off. printed the base, flashed, taped over the design. got it dialed in after the second try and I was golden. I'm starting to see what kind of adjustments I need to make to get the screen to go where I want.

I got mine used from CGS. Reach out to Tony to see if he has any in stock. I forgot the exact price I paid, I think around $1700. Depending on how new it is, the price will vary. I have the older style but it still gets the job done.

CGS is where I got my Diamondback and compressor. Tony’s stuff is great condition and well worth the money considering some of the trash in the used market. Would recommend with confidence.


Sent from my iPhone using Tapatalk


Offline Nation03

  • Gonzo Member
  • ******
  • Posts: 1260
  • The Dude abides.
Re: screen registration system
« Reply #16 on: March 11, 2019, 04:36:53 PM »
Nice, same here! Got my manual, triloc and Diamondback from him. Always a great experience. Gotta get my hands on a gas dryer from them eventually as well.

Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
Re: screen registration system
« Reply #17 on: March 11, 2019, 05:58:20 PM »
You can always look into Workhorses Registration system. 

Offline rusty

  • Hero Member
  • *****
  • Posts: 504
Re: screen registration system
« Reply #18 on: March 11, 2019, 06:16:07 PM »
Nice, same here! Got my manual, triloc and Diamondback from him. Always a great experience. Gotta get my hands on a gas dryer from them eventually as well.

Yeah, I'll reach out to him about a triple-loc. Emailed him today about a dryer.

Offline lancasterprinthouse

  • Full Member
  • ***
  • Posts: 209
Re: screen registration system
« Reply #19 on: March 11, 2019, 06:17:11 PM »
Nice, same here! Got my manual, triloc and Diamondback from him. Always a great experience. Gotta get my hands on a gas dryer from them eventually as well.

Yeah, I'll reach out to him about a triple-loc. Emailed him today about a dryer.

He was working on a sprint when I was there about 4 weeks ago. Not sure if they sold it or not. One of those will be on my hit list once I get into a shop that has gas


Sent from my iPhone using Tapatalk

Offline rusty

  • Hero Member
  • *****
  • Posts: 504
Re: screen registration system
« Reply #20 on: March 11, 2019, 06:38:43 PM »
Nice, same here! Got my manual, triloc and Diamondback from him. Always a great experience. Gotta get my hands on a gas dryer from them eventually as well.

Yeah, I'll reach out to him about a triple-loc. Emailed him today about a dryer.

He was working on a sprint when I was there about 4 weeks ago. Not sure if they sold it or not. One of those will be on my hit list once I get into a shop that has gas

yeah same here. so in the meantime I am on the hunt for a brown sierra dryer.


Sent from my iPhone using Tapatalk

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: screen registration system
« Reply #21 on: March 12, 2019, 11:10:09 AM »
Specializing in shop assessment's, flow and efficiency

Offline Rob Coleman

  • Sr. Member
  • ****
  • Posts: 359
Re: screen registration system
« Reply #22 on: March 12, 2019, 12:45:47 PM »
yeah, pretty much the same thing. the reason I have been doing the whole packing tape for sim/cmyk is I don't want ink buildup i the wrong places on back of the screen. Ands the mesh is usually 305 so not to much ink to wipe off.

Pulling the trigger on a tri loc soon enough
are you going to see the tri loc or just pulling the trigger site unseen. I emailed them a while and got a very "uninterested" response.  I would love to see it inaction at a shop or even a trade show. I know it is not a huge investment but I don't love the diamonback. I want to buy someting that I do really like...

We will be printing seven different designs in the Nazdar SourceOne booth at the Atlantic City ISS next week.  Tri-Loc is a big reason how we make the setups so fast!  Come by and see us. 


Sent from my iPad using Tapatalk
Rob Coleman | Vice President
Textile Business Unit | Nazdar SourceOne | sourceone.nazdar.com
(800) 677-4657 ext. 3708 | Cell (678) 230-4463
rcoleman@nazdar.com