« previous next »
Pages: [1]   Go Down

Author Topic: How to clear clogged nozzle. I Image  (Read 883 times)

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
How to clear clogged nozzle. I Image
« on: February 19, 2019, 08:34:05 AM »
I just realized after set up I was never given any idea on what procedure you can do to get a clean nozzle check other than a basic head clean. Starting to get a couple clogged nozzles and repeated head cleans is not clearing them. What do people do from that point?
Logged
"No man is an island"

Offline brandon

  • Gonzo Member
  • ******
  • Posts: 1709
Re: How to clear clogged nozzle. I Image
« Reply #1 on: February 19, 2019, 09:39:08 AM »
Purges. It will be in your instruction manual.
Logged

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Re: How to clear clogged nozzle. I Image
« Reply #2 on: February 19, 2019, 11:11:32 AM »
Its not in my manual.

Is there an online version?
Logged
"No man is an island"

Offline kirkwad

  • Verified/Junior
  • **
  • Posts: 87
Re: How to clear clogged nozzle. I Image
« Reply #3 on: February 19, 2019, 11:15:16 AM »
Purge document attached
Logged

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Re: How to clear clogged nozzle. I Image
« Reply #4 on: February 19, 2019, 11:17:50 AM »
Awesome thanks!
Logged
"No man is an island"

Offline brandon

  • Gonzo Member
  • ******
  • Posts: 1709
Re: How to clear clogged nozzle. I Image
« Reply #5 on: February 19, 2019, 11:40:18 AM »
That's right, you are correct. We had to get it from M&R then we printed it and stapled it to our manual. Sorry it's been awhile
Logged
Pages: [1]   Go Up
« previous next »