Author Topic: canuter rodor valve?  (Read 3052 times)

Offline jason-23

  • Hero Member
  • *****
  • Posts: 958
  • FONTNINJA
canuter rodor valve?
« on: December 12, 2011, 04:33:21 PM »
Most people know that a canuter valve or rod is not a real part of a car (as far as i know). but what would one look like? muffler bearings i think i know what they should look like along with red brake light fluid but the canuter is an illusive creature....


Offline T Shirt1

  • !!!
  • Full Member
  • ***
  • Posts: 225
Re: canuter rodor valve?
« Reply #1 on: December 12, 2011, 04:51:42 PM »
Looks like it might be pretty wide spread.  Is your car French?

http://www.athenstalks.com/canuter-valve-issues
steve

Offline Homer

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3208
Re: canuter rodor valve?
« Reply #2 on: December 12, 2011, 04:52:05 PM »
buddy of mine worked at a shop cutting granite counter tops. . . .They sent him to NAPA for an underwater muffler bearing, he went to 3 different places. . .I never laughed so hard in my life...
...keep doing what you're doing, you'll only get what you've got...

Offline Command-Z

  • !!!
  • Hero Member
  • *****
  • Posts: 956
Re: canuter rodor valve?
« Reply #3 on: December 12, 2011, 04:59:28 PM »

I once had a buddy's girlfriend convinced that you need to change the air in your tires every 3000 miles.
Design, Illustration and Color Separation for the Imprinted Apparel Industry for over 20 years. SeibelStudio.com
 Custom art not in the budget? Check out Bad Bonz Designs

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: canuter rodor valve?
« Reply #4 on: December 12, 2011, 05:10:00 PM »

I once had a buddy's girlfriend convinced that you need to change the air in your tires every 3000 miles.

Change your air every 3000 miles? What a maroon! Everyone knows you're probably fine for close to 20,000!

Young bat boys are often sent to pick up the key to the batter's box.
That rug really tied the room together, did it not?

Offline Command-Z

  • !!!
  • Hero Member
  • *****
  • Posts: 956
Re: canuter rodor valve?
« Reply #5 on: December 12, 2011, 06:43:15 PM »

Don't forget the box of halftone dots.
Design, Illustration and Color Separation for the Imprinted Apparel Industry for over 20 years. SeibelStudio.com
 Custom art not in the budget? Check out Bad Bonz Designs

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: canuter rodor valve?
« Reply #6 on: December 12, 2011, 08:49:34 PM »

Don't forget the box of halftone dots.

You know that that one isn't too far fetched.
I still have a pretty big box of Format fade scraps, lol! I take a long time to throw anything away.
That rug really tied the room together, did it not?

Offline Coyote71

  • !!!
  • Verified/Junior
  • **
  • Posts: 93
Re: canuter rodor valve?
« Reply #7 on: December 13, 2011, 01:50:53 AM »
Everyone knows you don't have to change the air in the tires evey 3000 miles. But you better switch from the summer air to the winter air. ;D

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: canuter rodor valve?
« Reply #8 on: December 13, 2011, 07:05:51 AM »
the joke around here was to send someone to the auto parts store or junk yard for a water pump on a Corvair, the other one was to a drug store for mouth piece grease for a trombone or trumpet.
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline jason-23

  • Hero Member
  • *****
  • Posts: 958
  • FONTNINJA
Re: canuter rodor valve?
« Reply #9 on: December 13, 2011, 07:36:33 AM »
Auto Mechanic Prank Call

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1886
Re: canuter rodor valve?
« Reply #10 on: December 13, 2011, 08:32:11 AM »
Do you know how many people still believe the word "gullible" can be found in the dictionary?
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA