Bonding pallet rubber to pallet rubber?

[merchmonster]

Has anyone bonded pallet rubber on top of existing pallet rubber? So rubber to rubber, not rubber to aluminum.

I'm asking because we have a set of platens that are made for a Workhorse that create off contact issues with our M&R presses. Looking for a hack to fix this without having to re-level our press every time we need to print with these things.

[tonypep]

Please list platen thicknesses for both presses
thx tp

[mooseman]

Aside from the mechanical dimensional differences IF your mission is to attach rubber to rubber here is my suggestion.
One work of caution this mpost likely is a one way trip. If you get it wrong or want to change it in the future you are going to have a real tough time undoing the bond.

Use this stuff 100% coat both pieces let it dry completely use a teflon sheet or wax paper to separate and align before allowing the pieces to contact and you are good to go.

https://tekmarltd.com/product/tb-hv/

This will positively work this is the stuff counter tops are appled with. Follow directions and you are good to go.

https://www.grainger.com/product/5E095?gclid=CjwKCAiAt4rfBRBKEiwAC678KZEPsfdMF-mjFutmeVXg_BePwwJS0HJkCejagGlKoJLofGFLPR114BoCp4oQAvD_BwE&cm_mmc=PPC:+Google+PLA&ef_id=CjwKCAiAt4rfBRBKEiwAC678KZEPsfdMF-mjFutmeVXg_BePwwJS0HJkCejagGlKoJLofGFLPR114BoCp4oQAvD_BwE:G:s&s_kwcid=AL!2966!3!264955915652!!!g!467408784604!

mooseman