« previous next »
Pages: [1]   Go Down

Author Topic: 4880 prints, then doesn't.  (Read 829 times)

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
4880 prints, then doesn't.
« on: October 22, 2018, 11:13:52 PM »
So, full story as I think it happened.

Some numbskull decided to plug the vent holes on my carts.

Then "hey, the film printed really lightly."

Hmm, maybe a head cleaning.  Yeah, that did it.

Then, "hey, the film isn't printing right again and it says low ink" (though no carts show it because they are refills)

Hmm... Oh crap, who did this?! (Discovering all the vents plugged up)

Unplug them and run a head cleaning all starts well again.

Now it's Monday and it's doing it again.  Head cleaning didn't fix it this time and it might be the fourth time not the third time.

Any ideas why this is happening?

I print one cart and the others just have ink in them.
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: 4880 prints, then doesn't.
« Reply #1 on: October 22, 2018, 11:26:41 PM »
Try an ink charge.

Pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: 4880 prints, then doesn't.
« Reply #2 on: October 22, 2018, 11:29:31 PM »
Quote from: blue moon on October 22, 2018, 11:26:41 PM
Try an ink charge.

Pierre

Will do, wet capped it and turned it off... Will see what happens in the morning when I get there.
Logged

Offline Maxie

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1328
Re: 4880 prints, then doesn't.
« Reply #3 on: October 22, 2018, 11:42:16 PM »
Try power cleaning.
Make sure there is enough ink in the cassettes.
Logged
Maxie Garb.
T Max Designs.
Silk Screen Printers
www.tmax.co.il

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: 4880 prints, then doesn't.
« Reply #4 on: October 23, 2018, 11:08:56 AM »
Could not get the Adjustment Program to work properly, kept giving an error like it wasn't connected (yep, even ran in compatibility mode)... so I did the Power Clean and all is well so far.

Let's see how it works after getting a few days rest.
Logged
Pages: [1]   Go Up
« previous next »