Direct to Garment > DTG - General
starting some dtg research
Gilligan:
--- Quote from: Steve Harpold on October 17, 2018, 03:16:19 PM ---Hey,
If you are looking at volume DTG here is a link of the process we created. The software and pretreat is available separately. Let me know how else I can help! The process is set up and running at the SGIA show for a closer look!
https://vimeo.com/237962184
--- End quote ---
Pretty legit Steve... Keep pushing!
mk162:
The video finally worked for me...that is really cool.
Fleetee:
Seems pretty consistent that an Epson DTG is not the way to go.
Through my research, these are the options I plan/planned to do more research in
- Epson (probably not anymore since everyone is telling me to stray away from them)
- Brothers
- Anajet
- T-jet
- Kornit
- M&R
- Coldesi
- Omni-print
Would you guys eliminate any options right off the bat? Or have any other brands that I should add into consideration?
Would you guys suggest me start with a wagner sprayer for pretreatment opposed to going directly for a pretreatment machine?
And for the most part, heat presses are all pretty similar right? No real reason to dive super deep into them?
Thanks a lot guys~
Fleetee:
--- Quote from: GraphicDisorder on October 17, 2018, 09:00:21 AM ---Don't just look at machine costs, which is what a lot of people focus on and that is a mistake.
You have to consider:
Machine Costs
Ink Costs
Maintenance Costs/Time involved to complete.
Actual print quality
Print speed
Availability of support
--- End quote ---
will do! thanks
Fleetee:
--- Quote from: Steve Harpold on October 17, 2018, 03:16:19 PM ---Hey,
If you are looking at volume DTG here is a link of the process we created. The software and pretreat is available separately. Let me know how else I can help! The process is set up and running at the SGIA show for a closer look!
https://vimeo.com/237962184
--- End quote ---
Hello. Are you an employee of Brothers?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version