Author Topic: Most optimal way of folding shirts on conveyor dryer  (Read 918 times)

Offline Fleetee

  • Verified/Junior
  • **
  • Posts: 77
Most optimal way of folding shirts on conveyor dryer
« on: October 07, 2018, 05:01:24 PM »
In order to get the most t-shirts on a conveyor dryer, how do you guys fold your shirts before throwing it on the conveyor dryer?


Offline mimosatexas

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4221
  • contributor
Re: Most optimal way of folding shirts on conveyor dryer
« Reply #1 on: October 08, 2018, 08:30:43 AM »
We don't fold. Shirts are pulled from the shoulders and the shoulders are placed on the belt. One quick.motion, minimal movement.

Offline Prince Art

  • Hero Member
  • *****
  • Posts: 793
Re: Most optimal way of folding shirts on conveyor dryer
« Reply #2 on: October 08, 2018, 09:40:44 AM »
When we need to fold on the belt:
   Pull by shoulders;
   Turn toward belt while raising high enough that the tail will drag slightly on belt;
   Give the shirt a little flick/pop forward, then pull back & down in such a way that the unprinted tail section folds face down, while the the printed section stays face up.

With a little practice, this can be done very quickly & fluidly, practically one motion. You can even add a quick flick with your free fingers to fold the sleeves in on the way down, then use thumbs to fold the neck backward & under as the shirt is landing against the belt. (Good if you have tags that like to curl & crisp in the dryer!)

That said, if you have room to lay flat, that's better - especially for the catcher at the end of the dryer (when you have one). It's way easier to catch & stack quickly when the shirts have been laid flat, and the shoulders are coming out first.


   


Nice guys laugh last.