« previous next »
Pages: [1]   Go Down

Author Topic: Up close prints  (Read 3468 times)

Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3540
Up close prints
« on: September 28, 2018, 07:26:55 PM »
Does anyone have any pics of any of their sim process prints through a loupe?

We are working on an incredibly difficult print, and it has me questioning if i understand how the dots need to align!
Logged
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: Up close prints
« Reply #1 on: September 28, 2018, 07:29:33 PM »
Quote from: ericheartsu on September 28, 2018, 07:26:55 PM
Does anyone have any pics of any of their sim process prints through a loupe?

We are working on an incredibly difficult print, and it has me questioning if i understand how the dots need to align!

I'm sure Dot Tone or Pierre have a few hundred photos.
Logged
Specializing in shop assessment's, flow and efficiency

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6368
Re: Up close prints
« Reply #2 on: September 28, 2018, 08:49:51 PM »
Quote from: ericheartsu on September 28, 2018, 07:26:55 PM
Does anyone have any pics of any of their sim process prints through a loupe?

We are working on an incredibly difficult print, and it has me questioning if i understand how the dots need to align!

can you be more specific? If I don't have it it would not be hard to snap some.
What kind of magnification are you looking for?

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1610
  • Ink and Chemical Product Manager
Re: Up close prints
« Reply #3 on: September 28, 2018, 10:21:24 PM »
here are some I just took.  The Robot shirt I have washed over a dozen times.  The frog shirt has a gell print on top
Logged
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.

Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1610
  • Ink and Chemical Product Manager
Re: Up close prints
« Reply #4 on: September 28, 2018, 10:22:07 PM »
Robot
Logged
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.

Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1610
  • Ink and Chemical Product Manager
Re: Up close prints
« Reply #5 on: October 01, 2018, 08:22:32 PM »
Eric,

How did your job turn out?
Logged
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.
Pages: [1]   Go Up
« previous next »