Author Topic: Webinar Invitation: 5 Key Points for Screen Printing Wet on Dry  (Read 798 times)

Offline Rob Coleman

  • Sr. Member
  • ****
  • Posts: 359
Don't let flash curing slow down your production. Wet on dry printing with waterbased inks can reduce your time on press and increase your output. We documented the techniques used to master this process and the steps are surprisingly simple.
 
On Thursday, May 24, Nazdar SourceOne and MagnaColours will reveal 5 key points for screen printing wet on dry with the new, game-changing MagnaPrint Edge waterbased inks. In this live, interactive webinar, we'll cover best practices and tips to get you started printing wet on dry, including:
•    Mesh count selection
•    Print sequence
•    Pallet temperature
•    Heat distribution
•    Dwell time
 
Don't miss the chance to learn how you can benefit from the wet on dry screen printing process from the experts. Register today! 

https://register.gotowebinar.com/register/2212347527950365442?utm_source=January18-%20Sales-All&utm_medium=ReachMail%20Inc.&utm_campaign=2136485_05-Mag-Edge-Webinar-Send2&utm_content=6674807_05-Mag-Edge-Webinar-Send2&utm_term=1275459_January18-%20Sales-All

Presented by Ivan Cossio - Business Development Manager at MagnaColours


Rob Coleman | Vice President
Textile Business Unit | Nazdar SourceOne | sourceone.nazdar.com
(800) 677-4657 ext. 3708 | Cell (678) 230-4463
rcoleman@nazdar.com


Offline Rob Coleman

  • Sr. Member
  • ****
  • Posts: 359
Re: Webinar Invitation: 5 Key Points for Screen Printing Wet on Dry
« Reply #1 on: May 21, 2018, 11:25:21 AM »
Just a reminder ...... If you are interested in the newest technologies with water based inks, please Nazdar SourceOne and Ivan Cossio from MagnaColours for an informative webinar.  Register at the link below:

https://register.gotowebinar.com/register/2212347527950365442

On Thursday, May 24, Nazdar SourceOne and MagnaColours will reveal 5 key points for screen printing wet on dry with the new, game-changing MagnaPrint Edge waterbased inks. In this live, interactive webinar, we’ll cover best practices and tips to get you started printing wet on dry including mesh count selection, print sequence, pallet temperature, heat distribution and dwell time.
Rob Coleman | Vice President
Textile Business Unit | Nazdar SourceOne | sourceone.nazdar.com
(800) 677-4657 ext. 3708 | Cell (678) 230-4463
rcoleman@nazdar.com