Classified Ads > Private listings

Jacket clamp and mesh protectors

(1/3) > >>

Evo:
For sale, best offer:


A&M 16" x 16" jacket clamp, ok condition.

Needs:
New gas springs
A good cleaning

I've never used it. Rubber is in great shape, but needs the old pallet tape cleaned off. Has an M&R pallet bracket, but it looks like it once had a Hopkins/Workhorse bracket mounted on it.
Parts can most likely be obtained from Atlas Screen Supply (formerly A&M). Clamp is very similar to this one:
http://www.atlasscreensupply.com/atlas_printing_accessories.htm#Gripmaster


Also:

Mesh protector tubes for 23x31 Newman M3 frames or similar. Most need cleaning. (old plastisol, etc)
Approx 30 or so long tubes for the 31" sides, and approx 25 or so short tubes for the 23" sides.


Best offer on either. Actually for the mesh protectors, you pay shipping and they're free.

Shawn (EIP):
How much for the jacket hold down? I WANT IT!!!

Evo:

--- Quote from: endless ink printing on December 02, 2011, 08:45:51 PM ---How much for the jacket hold down? I WANT IT!!!

--- End quote ---

Dunno. Best offer.

Evo:
By the way that is NOT burn marks on the pallet rubber, it's just old linty tape that was taking too long to peel off while I had packing to do...

Shawn (EIP):

--- Quote from: Evo on December 02, 2011, 08:53:59 PM ---By the way that is NOT burn marks on the pallet rubber, it's just old linty tape that was taking too long to peel off while I had packing to do...

--- End quote ---

just sent you my offer via private message, let me know what's up

Navigation

[0] Message Index

[#] Next page