My Progressive M-type was supposedly modified to handle a 25x36 frame an have an imprint area of 20x22. I have all 23x31 rollers and ordered some 25x36 to try out on some oversize work I have coming up. I measured and measured, but just didn't see how they could possibly fit. Sure enough, I throw them up on press and they fit perfectly! This is gonna open up alot of options for me as far as imprint size, as we (and I'm sure everyone else) get tons of requests for this. Only thing is the flash is only around 18" wide, so depending on the art we may have to discharge or do waterbase on oversize stuff (would probably be wise anyway since I won't need off-contact and there is barely any room for the squeegee and FB to fit inside the screens)
Actually I think I can get away with printing 4 colors up to 22x24 if I had some custom rollers made. To make things even better my roller master will take a 25x36 as well! Sweet!
So I got the Frames, a few pallets on the way from Action, some used SQ and FB on the way from M&R (thanks Rich!), and the Newman flash panels should be here tomorrow. Stoked!