Looking For: Manual arm adapters to M&R style plattens

[BrazosDesigns]

Hey all,

I have a Workhorse Mach 6/6 and wondered if anyone has any pallet arm adapters to convert to be able to use M&R style pallets.   

Let me know!

Thanks,
Darren

[Northland]

Hey all,

I have a Workhorse Mach 6/6 and wondered if anyone has any pallet arm adapters to convert to be able to use M&R style pallets.   

Would either of these fit ??
http://www.actionengineering.com/cat-258-1-1418/manual-bracket-adapter-2.htm
http://www.actionengineering.com/cat-258-1-1417/manual-bracket-adapter.htm

-0r-  you might be able to use your existing brackets and drill holes for Left/Right locking cams from M&R
https://www.mrprint.com/store/product/9050154-C/fabricated-parts-left-locking-cam-3-01-in-length-0-98-in-width-1-75-in-height

[BrazosDesigns]

Thanks for the suggestions.  It would be great to order the Action version, but not in the budget right now..

I'll check specks on the parts from M&R to see if they might work.

Thanks

[Northland]

Thanks for the suggestions.  It would be great to order the Action version, but not in the budget right now..
I'll check specks on the parts from M&R to see if they might work.
Thanks

I suspect using the M&R cam locks (with M&R pallets), on your existing brackets, would elevate your pallets 1" higher than normal.... which is an issue you'd need to address.

[kingscreen]

You can get them directly from Workhorse for $75.00.