« previous next »
Pages: [1]   Go Down

Author Topic: Printing on Sport Tek - ST700  (Read 1090 times)

Offline ThePrinter

  • Verified/Junior
  • **
  • Posts: 81
Printing on Sport Tek - ST700
« on: November 13, 2017, 12:53:31 PM »
Has anyone printed on the Sport Tek ST700 and had good success? If so how did you accomplish a nice smooth print?

I have not had great success with these. I am having fibrillation issues and it always prints rough. It is one of the only
products I have trouble with.
Logged

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7856
Re: Printing on Sport Tek - ST700
« Reply #1 on: November 13, 2017, 12:56:52 PM »
they are a PAIN.  you'll need an ink with good mat down, and no blowing agent.  We print these through either a 150s or 180s, but we prefer the 150's.

You can also use a smoothing screen or heat press them at the end.

We try and avoid these honestly.
Logged

Offline ThePrinter

  • Verified/Junior
  • **
  • Posts: 81
Re: Printing on Sport Tek - ST700
« Reply #2 on: November 13, 2017, 01:13:26 PM »
Yeah I have tried different white inks. I have used the roller. I have grey based with top white.

I loathe ST700 but I have one customer that likes them a lot. Plus I just want to beat this
garment and figure out the magical combination!
Logged

Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
Re: Printing on Sport Tek - ST700
« Reply #3 on: November 13, 2017, 01:16:20 PM »
I have never had luck with these.

Ultimately, I had to use a heat press at the end to get the image smooth.   

God speed on your journey. Keep the swear jar close, because im sure you might fill it up trying to figure out these shirts...
Logged

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: Printing on Sport Tek - ST700
« Reply #4 on: November 13, 2017, 01:22:28 PM »
We print barrier based back a little with chino (158 mesh, 70/90/70), flash, roller then print the top colors
Logged
Specializing in shop assessment's, flow and efficiency
Pages: [1]   Go Up
« previous next »